Semiconductor Components Industries, LLC, 2003
October, 2003 − Rev. 2
1 Publication Order Number:
MC100E210/D
MC100E210
5VECL Dual 1:4, 1:5
Differential Fanout Buffer
The MC100E210 is a low voltage, low skew dual differential ECL
fanout buffer designed with clock distribution in mind. The device
features two fanout buffers, a 1:4 and a 1:5 buffer, on a single chip. The
device features fully differential clock paths to minimize both device and
system skew. The dual buffer allows for the fanout of two signals through
a single chip, thus reducing the skew between the two fundamental
signals from a part−to−part skew down to an output−to−output skew. This
capability reduces the skew by a factor of 4 as compared to using two
LVE111’s to accomplish the same task.
The lowest TPD delay time results from terminating only one output
pair, and the greatest TPD delay time results from terminating all the
output pairs. This shift is about 10−20 pS in TPD. The skew between
any two output pairs within a device is typically about 25 nS. If other
output pairs are not terminated, the lowest TPD delay time results
from both output pairs and the skew is typically 25 nS. When all
outputs are terminated, the greatest TPD (delay time) occurs and all
outputs display about the same 10−20 pS increase in TPD, so the
relative skew between any two output pairs remains about 25 nS.
For more information on using PECL, designers should refer to
Application Note AN1406/D.
The V
BB
pin, an internally generated voltage supply, is available to this
device only. For single-ended input conditions, the unused differential
input is connected to V
BB
as a switching reference voltage. V
BB
may also
rebias AC coupled inputs. When used, decouple V
BB
and V
CC
via a
0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When
not used, V
BB
should be left open.
• Dual Differential Fanout Buffers
• 200 ps Part−to−Part Skew
• 50 ps Typical Output−to−Output Skew
• Low Voltage ECL/PECL Compatible
• The 100 Series Contains Temperature Compensation
• 28−lead PLCC Packaging
• PECL Mode Operating Range: V
CC
= 4.2 V to 5.7 V with V
EE
= 0 V
• NECL Mode Operating Range: V
CC
= 0 V with V
EE
= −4.2 V to −5.7 V
• Internal Input 75 K Pulldown Resistors
• Q Output will Default LOW with Inputs Open or at V
EE
• ESD Protection: Human Body Model; >2 KV,
Machine Model; >200 V
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
• Moisture Sensitivity Level 1
For Additional Information, see Application Note AND8003/D
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 179 devices
Device Package Shipping
†
ORDERING INFORMATION
*For additional information, see Application Note
AND8002/D
MC100E210FN PLCC−28 37 Units / Rail
MC100E210FNR2 PLCC−28 500 Tape & Reel
MARKING
DIAGRAM
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
PLCC−28
FN SUFFIX
CASE 776
MC100E210FN
AWLYYWW
128
http://onsemi.com
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.