THL 6-4812WISM

http://www.tracopower.com Page 1 of 3
DC/DC Converters
THL 6WISM Series, 6 Watt
Features
Compact design in SMD package
Ultra wide 4:1 input voltage range
Fully regulated outputs
I/O isolation 1500 VDC
Operating temp. range –40°C to +75°C
Short circuit protection
Input filter to meet EN 55022, class A
Qualified for leadfree reflow solder
process
3-year product warranty
The THL 6WISM series is a family of compact 6 W dc/dc-converters with 4:1 input
voltage ranges. The product is available in SMD-package which is 31% smaller than
a standard DIP-24 package. The internal filter to meet EN55022 Class A without
external components makes these converters easy to design in.
They come with remote On/Off and short circuit protection. THL 6WISM converter
is an excellent solution for data- and telecom applications and for instrumentation
and industrial electronics.
Order code Input voltage range Output voltage Output current max. Efficiency typ.
THL 6-2410WISM
3.3 VDC 1450 mA 76 %
THL 6-2411WISM
5.0 VDC 1200 mA 79 %
THL 6-2412WISM
12 VDC 500 mA 83 %
THL 6-2413WISM 9 – 36 VDC
15 VDC 400 mA 83 %
THL 6-2415WISM
(nominal 24 VDC)
24 VDC 250 mA 83 %
THL 6-2421WISM
±5 VDC ±600 mA 82 %
THL 6-2422WISM
±12 VDC ±250 mA 83 %
THL 6-2423WISM
±15 VDC ±200 mA 83 %
THL 6-4810WISM
3.3 VDC 1450 mA 76 %
THL 6-4811WISM
5.0 VDC 1200 mA 79 %
THL 6-4812WISM
12 VDC 500 mA 83 %
THL 6-4813WISM 18 – 75 VDC
15 VDC 400 mA 83 %
THL 6-4815WISM
(nominal 48 VDC)
24 VDC 250 mA 83 %
THL 6-4821WISM
±5 VDC ±600 mA 82 %
THL 6-4822WISM
±12 VDC ±250 mA 83 %
THL 6-4823WISM
±15 VDC ±200 mA 83 %
Models
C
B
Scheme
IEC 60950-1
226037
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
THL 6WISM Series 6 Watt
Input Specifications
Input current at no load (nominal input voltage) 24 Vin models: 30 mA typ.
48 Vin models: 20 mA typ.
Input current at full load (nominal input voltage) 24 Vin; 3.3 VDC model: 260 mA typ.
24 Vin other models: 300 mA typ.
48 Vin; 3.3 VDC model: 130 mA typ.
48 Vin other models: 150 mA typ.
Surge voltage (100 msec. max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise EN 55022 level A, FCC part 15, level A without
external components
Recommended input fuse (slow blow) 24 V models: 1500 mA
48 V models: 750 mA
Output Specifications
Voltage set accuracy ±2 % max
Regulation – Input variation Vin min. to Vin max. 1.0 % max.
– Load variation 15 – 100 % 1.2 % max.
Minimum load 15 % of rated max current (operation at lower
load condition is safe but a higher output ripple
will be experienced)
Temperature coefficient ±0.02 %/K
Ripple and noise (20 MHz bandwidth) 100 mVp-p max.
Transient response (25 % load step change)
– Recovery time 300 µs typ.
– Deviation ± 3 % typ.
Short circuit protection continuous, automatic recovery
Maximum capacitive load 3.3 & 5 VDC models: 330 µF
12, 15 & 24 VDC models: 100 µF
±512 & ±15 VDC models: 100 µF (each output)
General Specifications
Temperature – Operating (convection cooling 50 LFM, 0.25 m/s) –40°C to +75°C
– Storage –40°C to +125°C
– Case +105°C max.
Load derating (convection cooling 50 LFM, 0.25 m/s) 3.3 & 5.0 VDC models: 2.2 %/K above +55°C
other output models: 2.5 %/K above +60°C
Humidity (non condensing) 95 %
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >350‘000 h
Isolation voltage (60 sec.) Input/Output 1500 VDC
Isolation capacitance Input/Output 1500 pF max.
Isolation resistance Input/Output (500 VDC) >1 GOhm
Safety standard (designed to meet) IEC 60950-1, UL 60950-1
Certification documents www.tracopower.com/overview/thl6wism
Switching frequency 330 kHz
Altitude during operation 5‘000 m max. (16‘4 0 0 f t ) approved
Remote On/Off On: 2.5 to 50 VDC or open circuit
Off: 0.7 to +0.8 VDC
– Off stand by input current 10 mA max.
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Page 3 of 3
DC/DC Converters
THL 6WISM Series 6 Watt
Outline Dimensions
Pin Single Dual
1
Remote On/Off Remote On/Off
2
–Vin –Vin
6
ntc. Common
8
ntc. –Vout
9
+Vout +Vout
11
–Vout Common
16
+Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. July 12, 2018
Dimensions in [mm], () = Inch
Tolerances: ±0.25 (±0.01)
Pin pich tolerances: ±0.13 (±0.005)
Pysical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Pin material Phosphor bronze
Weight 7.8 g ( 0.27oz)
Lead-free reflow solder process as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Moisture sensivity level level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
ntc. = not to connect
22.0
(0.87)
0.15
(0.01)
10.05
(0.4)
20.3
(0.8)
10.16
(0.40)
5.08
(0.20)
2.11
(0.08)
top view
1
68
16 11 9
1.5 (0.06)
2
2.54
(0.10)
25.4
(1.0)
Ø1.5
(Ø 0.06) vent hole
12.5
(0.5)
12.35
(0.49)
Application note: www.tracopower.com/overview/thl6wism

THL 6-4812WISM

Mfr. #:
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union