C24
A3 • A4 Series●2mm Pitch Miniature Connector
BFunctional Block Chart
Receptacle and Socket Side
A3 (A)-*DA-2SV
Straight SMT Type
A3 (A)-*DA-2DSA(DSC, DSE)
Straight Through hole Type
A3B-*D-2C
Cable crimping type
A3 (A)-*PA-2SV
Straight SMT Type
A3C-*P-2DSA
Straight Through hole (low profile) Type
A3B-*PA-2DSA
Straight Through hole Type
A3B-*PA-2DS
Right Angle Through hole Type
Pin Header Side
BRecommended Temperature Profile
150ç
200ç
220ç
Soldering
(220ç min)
140
180
220
160
200
MAX250ç
240
260
0
90 to 120 sec.
MAX 60 sec.
Preheating(150 to 200ç)
Time (sec.)
Temperature (ç)
HRS test conditions
Test boardGlass epoxy 85mm∞60mm∞1.6mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.2mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Nov.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
