www.cherryswitches.com
Page 2 of 3, Last saved by 2015-03-02, Specifications subject to change without notice.
E13/G13 Series
Actuator
Max
Operating
Force
Max
Pre-Travel
Operating Point
Min Over-
Travel
Max
Movement
Differential
Actuation
Length
5
g (lb) mm (in) mm (in) mm (in) mm (in) mm (in)
E
425 (0.94)
1.27 (0.050) 7.24 ± 0.51 (0.285 ± 0.020) 2.54 (0.100) 0.38 (0.015) N/A
H
100 (0.22)
6.35 (0.250) 7.93 ± 1.57 (0.312 ± 0.062) 4.75 (0.187) 2.36 (0.093) 38.10 (1.500)
H
High ratio 65 (0.14) 8.71 (0.343) 7.14 ± 1.57 (0.281 ± 0.062) 4.75 (0.187) 3.56 (0.14) 44.45 (1.750)
J
425 (0.94)
1.27 (0.050) 17.02 ± 0.76 (0.670 ± 0.030) 2.74 (0.108) 0.38 (0.015) N/A
K
100 (0.22)
6.35 (0.250) 18.24 ± 1.57 (0.718 ± 0.062) 4.75 (0.187) 2.36 (0.093) 35.33 (1.391)
K High ratio 63 (0.14) 10.24 (0.403) 17.45 ± 1.57 (0.687 ± 0.062) 4.75 (0.187) 2.36 (0.093) 41.28 (1.625)
M
425 (0.94)
1.27 (0.050) 20.63 ± 0.76 (0.812 ± 0.030) 5.54 (0.218) 0.38 (0.015) N/A
E14 Series
Actuator
Max
Operating
Force
Max
Pre-Travel
Operating Point
Min Over-
Travel
Max
Movement
Differential
Actuation
Length
5
g (lb) mm (in) mm (in) mm (in) mm (in) mm (in)
A
850 (1.87)
2.54 (0.100) 6.30 ± 0.66 (0.248 ± 0.026) 1.27 (0.050) 0.38 (0.015) N/A
H
280 (0.62)
7.93 (0.312) 11.89 ± 1.57 (0.468 ± 0.062) 2.67 (0.105) 1.27 (0.050) 20.85 (0.821)
H
High ratio 170 (0.37)
13.34 (0.525) 11.10 ± 1.57 (0.437 ± 0.062) 5.54 (0.218) 2.03 (0.080) 27.20 (1.071)
J
850 (1.87) 2.54 (0.100) 16.08 ± 0.76 (0.633 ± 0.030) 1.27 (0.050) 0.38 (0.015) N/A
K
285 (0.63) 8.84 (0.348) 21.84 ± 1.57 (0.860 ± 0.062) 3.30 (0.130) 1.14 (0.045) 17.48 (0.688)
K High ratio 211 (0.47) 12.27 (0.483) 21.03 ± 1.57 (0.828 ± 0.062) 5.54 (0.218) 1.85 (0.073) 23.95 (0.943)
M
850 (1.87) 2.54 (0.100) 19.69 ± 0.76 (0.775 ± 0.030) 4.27 (0.168) 0.38 (0.015) N/A
3
Contact factory regarding combinations not shown
4
Measured above reference line; refer to dimensional drawing below
5
Actuator tolerances ± 0.791 mm (0.031”); G13 has operating point tolerance of ± 7.62 (0.30); E14 H and K actuators are shorter and formed up
11⁰ at the button
Case General Purpose Phenolic
Actuating Button Thermoplastic
Common Terminal Copper Alloy
NO and NC Terminal
Copper Alloy (E13, G13)
Copper (E14)
Moving Blade
Copper Alloy (E13, G13)
Copper (E14)
Spring Stainless Steel
Auxiliary Actuators Cold-Rolled Steel (Nickel-Plated)
Roller Sintered Stainless Steel
Contacts
Gold Crosspoint (G13)
Silver Alloy (E13, E14)
Dimensions – see page 3
Environmental Specifications
Temperature Rating
105
C (221
F) standard
150 ⁰C (302 ⁰F) available
200
C (392
F) available for E13
Flammability Rating UL94HB