D
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
0.55 amp @ 28 VDC; 0.25 amp @ 115 VAC.
Current Carrying Capacity: 7 amps.
Dielectric Strength: 750 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: Diallyl in excess of 900,000 megohms.
Glass in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
DIALLYL PHTHALATE INSULATION - ADJUSTABLE STOPS
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - SET @ 2 POS.
CERAMIC INSULATION - ADJUSTABLE STOPS
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - SET @ 2 POS. - 1/8 DIA. SHAFT
SPECIFICATIONS AND ORDERING INFORMATION
D2 - SERIES
1" DIAMETER 0.55 AMP @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Diallyl phthalate, glass, or ceramic.
Index: Dual-ball, side thrust design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 36° , 45°, and 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 10 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
STANDARD CONSTRUCTION D2D D2C
DIALLYL PHTHALATE INSULATION CERAMIC INSULATION
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
20
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
The D2 Series switch is used where space is at a premium. This dual-ball
side thrust index offers exceptional torque control and is available in 30°, 36°,
45°, and 60° angles. Standard designs utilize diallyl phthalate or ceramic
insulation, solder lug terminals, and 30° adjustable stop indexing.
01 02-12 1 1 D2D0112S D2D0112N DE 01 02-11 1 1 D2C0111S D2C0111N DB
02 02-06 2 1 D2D0206S D2D0206N DL 02 02-05 2 1 D2C0205S D2C0205N DG
02 02-12 1 2 D2D0212S D2D0212N DE 02 02-11 1 2 D2C0211S D2C0211N DB
03 02-05 3 1 D2D0305S D2D0305N DO 03 02-03 3 1 D2C0303S D2C0303N DN
03 02-12 1 3 D2D0312S D2D0312N DE 03 02-11 1 3 D2C0311S D2C0311N DB
04 02-06 2 2 D2D0406S D2D0406N DL 04 02-05 2 2 D2C0405S D2C0405N DG
06 02-05 3 2 D2D0605S D2D0605N DO 06 02-05 2 3 D2C0605S D2C0605N DG
06 02-06 2 3 D2D0606S D2D0606N DL 06 02-03 3 2 D2C0603S D2C0603N DN
