SPECIFICATION CONTROL DRAWING
Raychem
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED LEAD
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
DOCUMENT NO
D-100-33/36
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product
for their application.
DCR NUMBER:
D980608
REPLACES:
D1003x
DRAWN BY:
R. MAPALO
DATE:
06/15/98
REV.
SEE TABLE
DOC ISSUE:
2
SCALE::
NONE
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
“XY” WIRE GAUGE (AWG)
Product Revisions Product Dimensions Cable Dimensions
Product Name L
max
A
min
B
min
K
min
D
max
E
min
J±0.5
(J±0.02)
Color
Item 5
D-100-33 K 22 Black
D-100-34 L 17.25 2.7 3.10 150 22 2.7 9.9 7.0 White
D-100-35 K (0.680) (0.105) (0.125) (5.900) 20 (0.1.5 (0.035) (0.275) Black
D-100-36 K 20 White
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked polyvinylidene fluoride. Transparent blue.
2. SOLDER PREFORM WITH FLUX: Thermal indicator: red.
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
3. & 4. MELTABLE RING: Thermally stabilized thermoplastic. Color: grey.
5. GROUND LEAD: RAYCHEM 55A0111-XY in accordance with MIL-W-22759/32 AWGXY (see table) stranded tin
plated copper. Color: (see table).
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum.
Meeting the dimensional criteria listed, having tin or silver plated copper shields.
2. Temperature range: -55°C to +150°C.
3. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard
RCPS-100-70.
For best results, prepare the cable as shown:
*A trademark of Raychem Corporation.
