5-V Low Drop Fixed Voltage Regulator
TLE 4275
Data Sheet 1 Rev. 1.7, 2007-02-19
d
Type Package
TLE 4275 PG-TO220-5-11 (RoHS compliant)
TLE 4275 D PG-TO252-5-11 (RoHS compliant)
TLE 4275 G PG-TO263-5-1 (RoHS compliant)
TLE 4275 S PG-TO220-5-12 (RoHS compliant)
P-TO220-5-11
PG-TO220-5-11
P-TO252-5-11
PG-TO252-11
P-TO263-5-1
PG-TO263-5-1
P
-TO220-5-12
PG-TO220-5-12
Features
Output voltage 5 V ± 2%
Very low current consumption
Power-on and undervoltage reset
Reset low down to
V
Q
= 1 V
Very low-drop voltage
Short-circuit-proof
Reverse polarity proof
Suitable for use in automotive electronics
ESD protection > 4 kV
Green Product (RoHS compliant) version of TLE 4275
AEC qualified
Functional Description
The TLE 4275 is a monolithic integrated low-drop
voltage regulator in a 5-pin TO-package. An input
voltage up to 45 V is regulated to
V
Q,nom
= 5.0 V. The IC
is able to drive loads up to 450 mA and is short-circuit
proof. At overtemperature the TLE 4275 is turned off by
the incorporated temperature protection. A reset signal
is generated for an output voltage
V
Q,rt
of typ. 4.65 V.
The delay time can be programmed by the external
delay capacitor.
Data Sheet 2 Rev. 1.7, 2007-02-19
TLE 4275
Dimensioning Information on External Components
The input capacitor
C
I
is necessary for compensation of line influences. Using a resistor
of approx. 1 in series with
C
I
, the oscillating of input inductivity and input capacitance
can be damped. The output capacitor
C
Q
is necessary for the stability of the regulation
circuit. Stability is guaranteed at values
C
Q
22 µF and an ESR of 5 within the
operating temperature range.
Circuit Description
The control amplifier compares a reference voltage to a voltage that is proportional to the
output voltage and drives the base of the series transistor via a buffer. Saturation control
as a function of the load current prevents any oversaturation of the power element. The
IC also incorporates a number of internal circuits for protection against:
Overload
Overtemperature
Reverse polarity
TLE 4275
Data Sheet 3 Rev. 1.7, 2007-02-19
Figure 1 Pin Configuration (top view)
Table 1 Pin Definitions and Functions
Pin No. Symbol Function
1IInput; block to ground directly at the IC by a ceramic capacitor.
2ROReset Output; open collector output
3GNDGround; Pin 3 internally connected to heatsink
4DReset Delay; connect capacitor to GND for setting delay time
5QOutput; block to ground with a 22 µF capacitor,
ESR < 5 at 10 kHz.
AEP02580
15
ROΙ DQ
GND
AEP02756
GNDΙ
RO
Q
D
GND
RO
Ι
IEP02528
D
Q
PG-TO252-5-11
PG-TO263-5-1
PG-TO220-5-11
IEP02527
Ι
RO
GND
D
Q
PG-TO220-5-12

TLE4275S

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
LDO Voltage Regulators LW Drop Fixed VOLT REGULATOR 200mA 5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union