THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
IPL1-1XX-XX-X-D-RE1-K-XX
PLATING SPECIFICATION
LEAD STYLE
-01
TAIL OPTION
-RE1: RIGHT ANGLE / ELEVATED
-WT: WELD TAB
OPTION
-02 THRU -25
No OF POSITIONS (PER ROW)
-D: DOUBLE
ROW SPECIFICATION
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
POLARIZATION
-K: KEYED POLARIZATION
.100 2.54
(TYP)
(TOL NON-ACCUM)
(NO OF POS - 1) x .100[2.54]
(NO OF POS x .100[2.54])+.160[4.06] REF
.100 2.54
.325 8.26
REF
.040 1.02
REF
.150 3.81
REF
.100 2.54
REF
(NO OF POS x .100[2.54]) + .075[1.91]
2
MAX SWAY
(EITHER DIRECTION)
DESIGNED & DIMENSIONED
IN INCHES [MILLIMETERS]
C
L
01 02
C
C
C
C
.300 7.62
REF
.025 0.64
SQ
REF (TYP)
"A"
"A"
SEE NOTE 7
IPL1-XX-D-RE1-K
FIG 1
IPL1-106-01-XXX-D-RE1-K-WT SHOWN
.100±.007 2.54±0.18
(SEE NOTE 4)
.080 2.03
(SEE NOTE 5)
.095 2.41
REF
SEE NOTE 6
.215 5.46
REF
.193 4.89
.095 2.41
.025 0.64
SQ
REF (TYP)
SECTION "A"-"A"
T-1S64-20-XXX
T-1S64-21-XXX
C
C
WT-28-02-T
C
C
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3]
2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100[2.54] ELEVATED RA TERMINAL ASSEMBLY
BY:
IPL1-1XX-XX-X-D-RE1-K-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
JESSIEW
4/24/2014
2
1
SHEET SCALE: 4:1
INSULATOR: LCP UL94-V0, COLOR: BLACK
TERMINAL: PHOS BRONZE
WELD TAB: BRASS
F:\DWG\MISC\MKTG\IPL1-1XX-XX-X-D-RE1-K-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM TERMINAL / WELD TAB RETENTION: 1.0LB.[4.4N].
3. POST MUST BE WITHIN .005[.13] OF EACH OTHER.
4. ALL PIN TO PIN DIMENSIONS TO BE MEASURED FROM TIP TO TIP.
5. DIMENSION TO BE MEASURED AT BEND.
6. TIP TO BE FLUSH TO .015 BELOW TOP OF SHROUD.
7. WELD TABS TO BE INSERTED WHILE ON CARRIER.
8. PARTS TO BE PACKAGED IN TUBES.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION B
