Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
220
TKA
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
products
(Black dot)
●
Endurance : 125 °C 3000 h
●
Low ESR at –40 °C (50 % lower than TG series)
●
Added ESR specifi cation after the endurance test
●
Vibration-proof product is available upon request.
●
RoHS compliant
Features
Speci cations
Surface Mount Type
Series : TK Type : V
Frequency correction factor for ripple current
Category temperature range
–40 °C to +125 °C
Rated voltage range 10 V.DC to 35 V.DC
Capacitance range 47 µF to 470 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I
<
0.01 CV After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC 10 16 25 35
(Impedance ratio at 120 Hz)Z(–25 °C)/Z(+20 °C) 3222
Z(–40 °C)/Z(+20 °C) 4333
Endurance
After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors
shall meet the limits specifi ed below.
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
tan
d
< 300 % of the initial limit (code U : ±350 %)
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
ESR after the life test
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall
meet the specifi ed below.
After 1000 hours
20 °C
< 150 % of the initial limit
–40 °C
< 200 % of the initial limit
After 2000 hours
20 °C
< 300 % of the initial limit
–40 °C
< 400 % of the initial limit
After 3000 hours
20 °C
< 1000 % of the initial limit
–40 °C
< 1500 % of the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 10 V.DC 220 µF
Marking color : BLACK
Size
code
0D
L A, B H I W P K
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
DimensionsMarking
(Unit : mm)
R. Voltage
(V.DC)
10 16 25 35
Code ACEV
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
Mar. 201604
