For further information contact your local STMicroelectronics sales office.
September 2013 DocID025205 Rev 2 1/4
SPC5-CONNECT
Programmable interface for PC communication
to automotive target systems
Data brief
Features
• USB connection to PC
• 2 CAN channels (1x ST‐L9616 CAN
transceiver)
• 1 LIN (transceiver, multiplexed from SCI)
• 1 UART (ST‐RS232 transceiver, multiplexed
from SCI)
• 1 Kline (ST‐L9637D transceiver, multiplexed
from SCI)
• 18 GPIO’s (6 eMIOS)
• 4 ADC channels
• 2 SPI with 6 Chip Select (shared with GPIO)
• 1 NMI
• 3 LEDs (one power‐on LED controllable via
software);
• Reset control
• Integrated automotive microcontroller
SPC563M64
• Flat cable with connectors included:
– 14 pin header connector
– DB9 connector for CAN/UART
• Extended features (on board):
– Two header connectors for easy signals
access
–JTAG 14‐pin header connector
– 5 V supply option for stand-alone
operations
• Specification:
– Plastic Box size: 114 x 74 x 25 mm
Description
The SPC5 Connect is a programmable USB
interface designed to connect a PC to
development hardware or integrated modules via
automotive communications channels such as
CAN, SCI, LIN and K-Line.
Based on the 32bit SPC563M64 microcontroller
the SPC5 Connect offers from a PC via USB full
access to the integrated microcontroller features
like I/O signals, analog channels, external
interrupts input and automotive communication
buses such as CAN, UART,K-Line, LIN and SPI.
The hardware features, also accessible through
the Script Engine firmware, makes the SPC5
Connect a powerful, low cost and easy to use tool
for rapid development of small scripts in lab
applications.
The included extension flat cable with the 14 pin
header connector and the DB9 connector makes
possible to easily connect a daughter board or
wrapping board for a specific application.
SPC5 Connect is supported by a specific set of
software tools which allows easy programming of
the device together with basic control and
monitoring features of target signals. The
software application has been designed by
STMicroelectronics experts.
Table 1. Device summary
Order code Reference
SPC5-CONNECT SPC5 Connect hardware
www.st.com