CZB06S04030050LEA

CZB
www.vishay.com
Vishay Dale
Revision: 14-May-14
1
Document Number: 31101
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thick Film Chip Attenuator, Surface Mount, Balanced Type
FEATURES
Single component reduces board space and
component counts - replaces 3 or more
components
Tolerance matching and temperature tracking
superior to individual components
Maximum power dissipation: 0.075 W for
CZB06S
Consult factory for extended values,
non-standard tolerances, impedance matching and other
attenuation values
Frequency range: DC to 3 GHz
Surface mount chip attenuator in a resistor array package
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
Note
Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material.
Note
(1)
Consult factory for other attenuations.
Note
For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc?31540
).
Available
Available
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
POWER RATING P
70 °C
W
IMPEDANCE
ATTENUATION RANGE AND TOLERANCE
± 0.3 dB (L) ± 0.5 dB (H)
CZB06S 0.075 50/75 0 dB, 1 dB to 5 dB 6 dB to 10 dB
IMPEDANCE 50 75
Attenuation in dB
(1)
11
1.5 1.5
22
33
44
55
66
10 10
CIRCUIT SCHEMATIC
4-PIN CIRCUIT
Balanced π Type
4
1
3
2
R1
R2
R2
CZB06S
(Marking)
R1
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CZB06S
Rated dissipation at 70 °C W 0.075
VSWR 1.2 max.
Category temperature range °C -55 to +150
Frequency range DC to 3 GHz
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CZB06S04020050LRT (preferred part numbering format)
MODEL PIN COUNT ATTENUATION IMPEDANCE TOLERANCE PACKAGING SPECIAL
CZB06S 04 = 4 pin 010 = 1.0 dB
015 = 1.5 dB
020 = 2.0 dB
100 = 10.0 dB
000 = 0 dB
050 = 50
075 = 75
H = ± 0.5 dB
L = ± 0.3 dB
EA = Lead (Pb)-free, T/R
RT = Tin lead, T/R
(Dash number)
Up to 1 digit
Blank = Standard
TRL05002040S60BZC
CZB
www.vishay.com
Vishay Dale
Revision: 14-May-14
2
Document Number: 31101
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
GLOBAL
MODEL
DIMENSIONS in inches (millimeters)
L W T A P B B*
CZB06S
0.063 ± 0.006
(1.60 ± 0.15)
0.059 ± 0.006
(1.50 ± 0.15)
0.020 ± 0.004
(0.51 ± 0.10)
0.024 ± 0.006
(0.61 ± 0.15)
0.031
(0.80)
0.012 ± 0.006
(0.30 ± 0.15)
0.012 ± 0.006
(0.30 ± 0.15)
GLOBAL
MODEL
SOLDER PAD DIMENSIONS in inches (millimeters)
c w d a b
CZB06S 0.031 (0.80) 0.122 (3.10) 0.014 (0.36) 0.025 (0.63) 0.045 (1.15)
P
4-Terminal device
S - Version
CZB06S
Pin 1
CZB06S
Pin 1
120
100
80
60
40
20
0
- 55 - 25 0 25 50 75 100 125 150 175
Ambient Temperature °C
70
Derating CZB06S
Rated Power %
PERFORMANCE
TEST CONDITIONS OF TEST
TEST RESULTS (TYPICAL TEST LOTS)
0.5 dB to 5 dB 6 dB to 10 dB
Endurance test at 70 °C
per EIA 575-3.14
1000 h at 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± 0.2 dB ± 0.3 dB
Overload
per EIA 575-3.6
Short time overload ± 0.2 dB ± 0.3 dB
Thermal shock Per EIA 575-3.5 ± 0.2 dB ± 0.3 dB
Moisture resistance Per EIA 575-3.10 ± 0.2 dB ± 0.3 dB
Resistance to soldering heat
10 s at 260 °C solder bath temperature
EIA 575 3.8
± 0.2 dB ± 0.3 dB
High temperature exposure Per EIA 575-3.7 ± 0.2 dB ± 0.3 dB
Low temperature operations Per EIA-575-3.6 ± 0.2 dB ± 0.3 dB
Solderability and leaching EIA 575-3.12 95 % coverage
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

CZB06S04030050LEA

Mfr. #:
Manufacturer:
Vishay / Dale
Description:
Attenuators 4pin 50ohm +/- 0.3dB Attenuation 3dB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union