6.42
3
IDT71V424S, IDT71V424L, 3.3V CMOS Static RAM
4 Meg (512K x 8-bit) Commercial and Industrial Temperature Ranges
Absolute Maximum Ratings
(1)
Recommended Operating
Temperature and Supply Voltage
Recommended DC Operating
Conditions
DC Electrical Characteristics
(VDD = Min. to Max., Commercial and Industrial Temperature Ranges)
DC Electrical Characteristics
(1, 2, 3)
(VDD = Min. to Max., VLC = 0.2V, VHC = VDD – 0.2V)
NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any other conditions above those
indicated in the operational sections of this specification is not implied. Exposure
to absolute maximum rating conditions for extended periods may affect
reliability.
NOTES:
1. VIH (max.) = VDD+2V for pulse width less than 5ns, once per cycle.
2. VIL (min.) = –2V for pulse width less than 5ns, once per cycle.
NOTES:
1. All values are maximum guaranteed values.
2. All inputs switch between 0.2V (Low) and VDD - 0.2V (High).
3. Power specifications are preliminary.
4. fMAX = 1/tRC (all address inputs are cycling at fMAX); f = 0 means no address input lines are changing.
Symbol Rating Value Unit
V
DD
Supply Voltage Relative to
V
SS
-0.5 to +4.6 V
V
IN
, V
OUT
Terminal Voltage Relative
to V
SS
-0.5 to V
DD
+0.5 V
T
BIAS
Temperature Under Bias -55 to +125
o
C
T
STG
Storage Temperature -55 to +125
o
C
P
T
Power Dissipation 1 W
I
OUT
DC Output Current 50 mA
3622 tbl 04
Symbol Parameter Min. Typ. Max. Unit
V
DD
Supply Voltage 3.0 3.3 3.6 V
V
SS
Ground 0 0 0 V
V
IH
Input High Voltage 2.0
____
V
DD
+0.3
(1)
V
V
IL
Input Low Voltage -0.3
(2)
____
0.8 V
3622 tbl 06
Grade Temperature V
SS
V
DD
Commercial 0°C to +70°C 0V See Below
Industrial –40°C to +85°C 0V See Below
3622 tbl 05
Symbol Parameter Test Condition
IDT71V424
Min. Max. Unit
|I
LI| Input Leakage Current VDD = Max., VIN = VSS to VDD
___
5µA
|I
LO| Output Leakage Current VDD = Max., CS = VIH, VOUT = VSS to VDD
___
5µA
V
OL Output Low Voltage IOL = 8mA, VDD = Min.
___
0.4 V
V
OH Output High Voltage IOH = -4mA, VDD = Min. 2.4
___
V
3622 tbl 07
Symbol Parameter
71V424S/L 10 71V424S/L 12 71V424S/L 15
Unit
Com'l. Ind. Com'l. Ind. Com'l. Ind.
I
CC
Dynamic Operating Current
CS <
V
LC
, Outputs Open, V
DD
= Max., f = f
MAX
(4)
S 180 180 170 170 160 160 mA
L 165 165 155 155 145 145 mA
I
SB
Dynamic Standby Power Supply Current
CS >
V
HC
, Outputs Open, V
DD
= Max., f = f
MAX
(4)
S606055 555050mA
L555550 504545mA
I
SB1
Full Standby Power Supply Current (static)
CS >
V
HC
, Outputs Open, V
DD
= Max., f = 0
(4)
S202020 202020mA
L101010101010mA
3622 tbl 08