SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE* FLAT CABLE
TERMINATION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO:
D-110-20
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D980922
REPLACES:
D11020
DRAWN BY:
M. FORONDA
DATE:
07/24/98
PROD. REV.
SEE TABLE
DOC ISSUE:
1
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions
Product Name L
max
øB
min
C
max
D-110-20 B 13.3
(0.520)
2.65
(0.105)
7.0
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
APPLICATION
1. This sleeve is designed to connect tin plated wires, having an insulation rated for at least 125°C, to a flat cable conductors having
a wire widths of 2.54 (.100) (across the insulation) tin plated copper and insulation rated for at least 125°C.
2. Temperature range: -55°C to +150°C.
* A trademark of Raychem Corporation.
