OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

0368770008

P1-P3P4-P6P7-P7
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
PRODUCT SPECIFICATION
FOR
DITTO
TM
INTERCONNECTS
SHEET No.
A
EC No:
I2015-0055
1 of 7
DATE:
2014 / 11 / 27
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-36876-001
NCSR
NCSR
KPRASAD
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
DITTO
TM
INTERCONNECTS
1.0 SCOPE
This Product Specification covers the 2.5 mm (.098 inch) centerline (pitch) connector series
terminated with 20 to 26 AWG wire using Crimp technology with Tin over Nickel plating.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND SERIES NUMBER(S)
DITTO GENDERLESS CRP TER HSM Cu 20-22AWG
36876
DITTO GENDERLESS CRP TER HSM Cu 24-26AWG
DITTO GENDERLESS WTW HSG FRIC LOCK 1X2
36877
DITTO GENDERLESS WTW HSG FRIC LOCK 1X3
DITTO GENDERLESS WTW HSG FRIC LOCK 1X4
DITTO GENDERLESS WTW HSG FRIC LOCK 1X5
DITTO GENDERLESS WTW HSG FRIC LOCK 1X6
DITTO GENDERLESS WTW HSG FRIC LOCK 1X7
DITTO GENDERLESS WTW HSG FRIC LOCK 1X8
DITTO GENDERLESS HOUSING 1X2 TOOL REMOVAL VERSION
150171*
DITTO GENDERLESS HOUSING 1X3 TOOL REMOVAL VERSION
DITTO GENDERLESS HOUSING 1X4 TOOL REMOVAL VERSION
DITTO GENDERLESS HOUSING 1X5 TOOL REMOVAL VERSION
DITTO GENDERLESS HOUSING 1X6 TOOL REMOVAL VERSION
DITTO GENDERLESS HOUSING 1X7 TOOL REMOVAL VERSION
DITTO GENDERLESS HOUSING 1X8 TOOL REMOVAL VERSION
*Under development
2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS
REFER SD-36877-001, SD-36876-001
REFER SD-150171-0001 (TBE)
2.3 SAFETY AGENCY APPROVALS
UL FILE NUMBER: E29179
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
Application Tooling Specification Sheet 20-22 AWG: ATS-639030200
Application Tooling Specification Sheet 24-26 AWG: ATS-639030300
Unlatching Tooling Specification for Product Series 150171: TBE
Refer section 6.0 for Environmental Test Sequences
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
PRODUCT SPECIFICATION
FOR
DITTO
TM
INTERCONNECTS
SHEET No.
A
EC No:
I2015-0055
2 of 7
DATE:
2014 / 11 / 27
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-36876-001
NCSR
NCSR
KPRASAD
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
4.0 RATINGS
4.1 VOLTAGE
350 Volts AC/DC
4.2 APPLICABLE WIRES
Refer Application Tooling Specification Sheets (see section 3.0) for details.
AWG
Insulation Diameter
20
1.35-1.70 mm (.053-.067 inch)
22
24
1.05-1.50 mm (.041-.059 inch)
26
4.3 CURRENT
Ratings shown below represent maximum current carrying capacity of a fully loaded connector
with all circuits powered using UL1061 stranded wire. Ratings are based on a 30 °C maximum
temperature rise limit over ambient (see section 5.1.4 for specification) without derating. Current
is dependent on connector size, ambient temperature and related factors. Actual current rating is
application dependent and should be evaluated for each use.
2 CIRCUIT
3 CIRCUIT
4 CIRCUIT
5 CIRCUIT
6 CIRCUIT
7 CIRCUIT
8 CIRCUIT
20 AWG
8.0 A
8.0 A
6.3 A
6.3 A*
6.1 A
5.8 A*
5.6 A
22 AWG
6.4 A
6.3 A*
5.4 A*
5.6 A*
4.9 A*
4.8 A*
4.5 A*
24 AWG
5.3 A
5.1 A*
4.7 A*
4.4 A*
4.2 A*
4.0 A*
3.8 A*
26 AWG
4.4 A
4.1 A
4.1 A
4.0 A*
3.6 A
3.4 A*
3.2 A
* Interpolated values
4.4 TEMPERATURE
Operating: - 40 °C to + 105 °C
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
PRODUCT SPECIFICATION
FOR
DITTO
TM
INTERCONNECTS
SHEET No.
A
EC No:
I2015-0055
3 of 7
DATE:
2014 / 11 / 27
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-36876-001
NCSR
NCSR
KPRASAD
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
5.0 PERFORMANCE
5.1 ELECTRICAL REQUIREMENTS
ITEM
DESCRIPTION
TEST CONDITION
REQUIREMENT
5.1.1
Contact
Resistance
(Low Level)
Mate connectors: apply a maximum voltage
of 20 mV and a current of 100 mA.
EIA-364-23C
3.5 milliohms
MAXIMUM
[initial]
5.1.2
Insulation
Resistance
Mate connectors: Apply a voltage of 500
VDC between adjacent terminals and
between terminals to ground.
EIA-364-21C
1000 Megohms
MINIMUM
5.1.3
Dielectric
Withstanding
Voltage
Apply a voltage of 1700 VAC for 1 minute
between adjacent terminals and between
terminals to ground.
EIA-364-20D
No breakdown;
current leakage < 5 mA
5.1.4
Temperature
Rise
Mate connectors: measure the temperature
rise at the rated current.
EIA-364-70, Method 2
Temperature rise:
+30°C MAXIMUM
(above ambient)
P1-P3P4-P6P7-P7

0368770008

Mfr. #:
Buy 0368770008
Manufacturer:
Molex
Description:
Headers & Wire Housings DITTO HSG WTW 1X08P
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet