https://www.phoenixcontact.com/us/products/1438862
01.11.2013Page2/8
Sensor/Actuator cable-SAC-3P-10,0-PUR/BI-1438862
Technical data
General
Insulation resistance ≥ 100 MΩ
Status display No
Protective circuit/component Unwired
Surge voltage category III
Pollution degree 3
Torque 0.6 Nm (Valve connector)
Material
Inflammability class according to UL 94 V0
Valve plug contact material CuSn
Valve plug contact surface material Sn
Valve plug contact insert material PA 66
Material housing valve plug TPU
Sealing material TPU (Seal molded)
Cable
Cable type PUR halogen-free black
Cable type (abbreviation) PUR
Cable abbreviation Li9Y11Y-HF
UL AWM style 20549
Conductor cross section 3x 0.5 mm²
AWG signal line 20
Conductor structure signal line 28x 0.15 mm
Core diameter including insulation 1.5 mm ±0.05 mm (signal line)
Wire colors Black 1, black 2, green/yellow
Overall twist 3 wires, twisted
External sheath, color Black-gray RAL 7021
External cable diameter D 4.5 mm ± 0.2 mm
Smallest bending radius, fixed installation 22.5 mm
Number of bending cycles 15000000
Bending radius 50 mm
Traversing path 0.9 m
Traversing rate 5 m/s
Acceleration 30 m/s²
Outer sheath, material PUR
Material conductor insulation PP
Conductor material Bare Cu litz wires
Insulation resistance min. 20 MΩ*km
