AA2810AQBS/D Datasheet AA2810AQBS/D | P1-P3

SPEC NO: DSAK2437 REV NO: V.5B DATE: AUG/30/2014 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1201005915

2.8X0.8mm RIGHT ANGLE SMD CHIP LED

LAMP

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Part Number: AA2810AQBS/D Blue

Features

z 2.8mmX0.8mm right angle SMT LED, 1.2mm thickness.

z Low power consumption.

z Ideal for backlight and indicator.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Descriptions

z The Blue source color devices are made with InGaN

Light Emitting Diode.

z Electrostatic discharge and power surge could damage

the LEDs.

z It is recommended to use a wrist band or anti-

electrostatic glove when handling the LEDs.

z All devices, equipments and machineries must be

electrically grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.0039") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAK2437 REV NO: V.5B DATE: AUG/30/2014 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1201005915

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

2. As silicone encapsulation is permeable to gases, some corrosive substances such as H

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

SPEC NO: DSAK2437 REV NO: V.5B DATE: AUG/30/2014 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1201005915

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2.Forward Voltage: +/-0.1V.

3.Wavelength value is traceable to the CIE127-2007 compliant national standards.

4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or

premature failure.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Part No. Dice Lens Type

iewing

Angle [1]

Min. Typ. 2θ1/2

AA2810AQBS/D Blue (InGaN) Water Clear 80 150

110

Iv (mcd) [2]

@ 20mA

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Blue 460 nm I

F=20mA

λD [1] Dominant Wavelength Blue 465 nm I

F=20mA

Δλ1/2 Spectral Line Half-width Blue 25 nm I

F=20mA

C Capacitance Blue 100 pF V

F=0V;f=1MHz

F [2] Forward Voltage Blue 3.3 4 V IF=20mA

R Reverse Current Blue 50 uA VR=5V

Parameter Blue Units

Power dissipation 120 mW

DC Forward Current 30 mA

Peak Forward Current [1] 150 mA

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

P1-P3 P4-P6

AA2810AQBS/D

Mfr. #:

Buy AA2810AQBS/D

Manufacturer:

Kingbright

Description:

Standard LEDs - SMD RA Blue 470nm 150mcd 110deg Water Clr

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AA2810AQBS/D