6.42
IDT709089/79S/L
High-Speed 64/32K x 8 Synchronous Dual-Port Static RAM Industrial and Commercial Temperature Ranges
4
Recommended DC Operating
Conditions
Recommended Operating
Temperature and Supply Voltage
(1)
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
2. VTERM must not exceed VCC+ 10% for more than 25% of the cycle time or 10ns
maximum, and is limited to < 20mA for the period of VTERM > VCC + 10%.
3. Ambient Temperature Under DC Bias. No AC Conditions. Chip Deselected.
Absolute Maximum Ratings
(1)
NOTES:
1. These parameters are determined by device characterization, but are not
production tested.
2. 3dV references the interpolated capacitance when the input and output
switch from 0V to 3V or from 3V to 0V.
3. COUT also references CI/O.
Capacitance
(1)
(TA = +25°C, f = 1.0MHz)
NOTES:
1. This is the parameter TA. This is the "instant on" case temperature.
NOTES:
1. VTERM must not exceed VCC + 10%.
2. V
IL > -1.5V for pulse width less than 10ns.
Grade Ambient
Temperature
GND V
CC
Commercial 0
O
C to +70
O
C0V 5.0V
+
10%
Industrial -40
O
C to +85
O
C0V 5.0V
+
10%
3242 tbl 04
Symbol Parameter Min. Typ. Max. Unit
V
CC
Supply Voltage 4.5 5.0 5.5 V
GND Ground 0 0 0 V
V
IH
Input High Voltage 2.2
____
6.0
(1)
V
V
IL
Input Low Voltage -0.5
(2)
____
0.8 V
3242 tbl 05
Symbol Rating Commercial
& Industrial
Unit
V
TERM
(2)
Terminal Voltage
with Respect to GND
-0.5 to +7.0 V
T
BIAS
Temperature Under Bias -55 to +125
o
C
T
STG
Storage Temperature -65 to +150
o
C
T
JN
Junction Temperature +150
o
C
I
OUT
DC Output Current 50 mA
3242 tbl 06
Symbol Parameter Conditions
(2 )
Max. Unit
C
IN
Input Capacitance V
IN
= 3dV 9 pF
C
OUT
(3 )
Output Capacitance V
OUT
= 3dV 10 pF
3242 tbl 07
DC Electrical Characteristics Over the Operating
Temperature and Supply Voltage Range
(VCC = 5.0V ± 10%)
NOTE:
1. At VCC < 2.0V input leakages are undefined.
Symbol Parameter Test Conditions
709089/79S/L
UnitMin. Max.
|I
LI
| Input Leakage Current
(1)
V
CC
= 5.5V, V
IN
= 0V to V
CC
___
10 µA
|I
LO
| Output Leakage Current
CE
0
= V
IH
or CE
1
= V
IL
, V
OUT
= 0V to V
CC
___
10 µA
V
OL
Output Low Voltage I
OL
= +4mA
___
0.4 V
V
OH
Output High Voltage I
OH
= -4mA 2.4
___
V
3242 tbl 08