PRODUCT DATASHEET
Features
PRODUCT DATASHEET
DCP42 160W Single Continuous
Switching Power Supply with USB
Features
• Constantly calculates and adjusts the Voltage
and Current limit points according to available
maximum power (160W)
• At maximum current (10A), voltage is limited to 16V;
at maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push
knob for fine and coarse tuning
• Remote control for Programming, Output Voltage/
Current, and ON/OFF using supplied software, driver,
and USB
• Three on-board user-defined Voltage/Current presets
• Store 20 presets with up to 999 cycles each on a PC
via USB and supplied Software
• Software also includes DC Ramp and
Waveform Generator
• Complete with power cord, software, and USB cable
Ordering
DCP42 .............. 160W Single Continuous Switching Power Supply with USB (100-240V)
www.extech.com
Specifications subject to change without notice. Copyright © 2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 4/18/13
Specifications
Output Voltage 0 to 42V
Output Current 0 to 10A
Basic Accuracy ±(0.2%+5 counts)
Load Voltage Regulation ≤0.15% (10-100% rated current)
Line Voltage Regulation ≤0.02% (90-264V AC)
Load Current Regulation ≤0.5% (10-90% rated voltage)
Line Current regulation ≤0.1% (90-264V AC)
Ripple and Noise ≤5m Vrms, ≤50m Vp-p
Dimensions/ Weight 7.9 x 3.7 x 9.5” (200 x 95 x 245mm)/ 5lbs (2.3kg)
Continuous switching Power Supply offers high
efficiency electrical power conversion for greater
energy conservation and lighter weight.
Applications:
- Laboratory use
- Bench Testing, Service, and Repair
- Research and Development facilities
- Educational and Institutional Training
