Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Page 4 of 4
Rev. July 7,. 2018
Dimensions
AC/DC Power Supplies
TOP-200 Series 200 Watt
Pin Output
1
+ Vout
2
+ Vout
3
+ Vout
4
– Vout
5
– Vout
6
– Vout
J2
Pin Input
1
AC in L
2
AC in N
J1
J1: Molex Series 41791
mates with Molex crimp terminal: 08-52-0072
and terminal housing: 09-50-3031
J2: Molex Series 41791
mates with Molex crimp terminal: 08-52-0072
and terminal housing: 09-50-3061
J3: Molex Series KK
mates with Molex crimp terminal: 08-50-0032
and terminal housing: 22-01-2025
PE: Faston
mates with TAB-6.3 (1/4”)
Dimensions in Inch, () = mm
4x ø 0.137
(3.5)
AC IN
OUT
4.71
(119.5)
2.72 (69.1)
3.0 (76.2)
4 x metal pillars (not included) for connection to conductive
plate in order to meet all EMC specifications
Minimum height: 0.2 (5.0), max. diameter: 0.25 (6.0)
1.34 (34.0)
0.14 (3.6)
1
J1
J2
1
On/Off
J3
1
PE
Pin Remote
1
–
2
+
J3
PE to connect to protective earth if used as safety class I unit
J3 remote On/Off function:
On: pin 1 & 2 open
Off:
- Pin 1 connected to secondary ground.
Note: Output voltage may pulse to 20% of nominal output
voltage.
- External current source of 10 mA
- External voltage source. Use external serial resistor (R
ext.
) in
reference to applied voltage (U
ext.
) as follows:
TO P 2 0 0 -112 : R
ext.
[Ohm] = (U
ext.
– 1.2)/0.01 – 150
TOP 200-115: R
ext.
[Ohm] = (U
ext.
– 1.2)/0.01 – 240
TOP 200-124: R
ext.
[Ohm] = (U
ext.
– 1.2)/0.01 – 430
TOP 200-148: R
ext.
[Ohm] = (U
ext.
– 1.2)/0.01 – 800
2
1
10m A
GND
Vout
External
Vo ltage/Current
Source
=
External ON/OFF
J3
R
ext
