TZMC1V0-GS08

TZMC1V0
www.vishay.com
Vishay Semiconductors
Rev. 1.5, 11-Jul-17
1
Document Number: 84123
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Zener Diodes
FEATURES
Very high stability
•Low noise
AEC-Q101 qualified
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Voltage stabilization
Note
(1)
The TZMC1V0 is a silicon diode operated in forward direction. Hence the index of all parameters should be “F” instead of “Z”. Connect the
cathode electrode to negative pole.
PRIMARY CHARACTERISTICS
PARAMETER VALUE UNIT
V
Z
range nom. 1.0 V
Test current I
ZT
5mA
V
Z
specification Pulse current
Int. construction Single
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
TZMC1V0 TZMC1V0-GS18 10 000 (8 mm tape on 13" reel) 10 000/box
TZMC1V0 TZMC1V0-GS08 2500 (8 mm tape on 7" reel) 12 500/box
PACKAGE
PACKAGE NAME WEIGHT
MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING CONDITIONS
MiniMELF SOD-80 31 mg -
MSL level 1
(according J-STD-020)
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Power dissipation R
thJA
300 K/W P
tot
500 mW
Zener current I
Z
P
tot
/V
Z
mA
Junction temperature T
J
175 °C
Storage temperature range
T
stg
-65 to +175 °C
Thermal resistance junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm
R
thJA
500 K/W
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PART NUMBER
ZENER VOLTAGE
RANGE
TEST CURRENT DYNAMIC RESISTANCE
TEMPERATURE
COEFFICIENT OF ZENER
VOLTAGE
V
Z
at I
ZT1
I
ZT1
I
ZT2
Z
Z
at I
ZT1
Z
ZK
at I
ZT2
TK
VZ
V mA Ω %/K
MIN. MAX. TYP. TYP. MIN. MAX.
TZMC1V0
(1)
0.7 0.8 5 1 < 8 < 50 -0.26 -0.23
TZMC1V0
www.vishay.com
Vishay Semiconductors
Rev. 1.5, 11-Jul-17
2
Document Number: 84123
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80
Cathode indentification
0.47 (0.019) max.
2.5 (0.098) max.
1.25 (0.49) min.
3.7 (0.146)
3.3 (0.130)
5 (0.197) ref.
2 (0.079) min.
1.6 (0.063)
1.4 (0.055)
Foot print recommendation:
*
* The gap between plug and glass can
be either on cathode or anode side
Document no.:6.560-5005.01-4
Rev. 8 - Date: 07.June.2006
96 12070
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

TZMC1V0-GS08

Mfr. #:
Manufacturer:
Vishay Semiconductors
Description:
Zener Diodes ZENER DIODE SOD80 MINIMELF-e2
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet