ICSLV810
BUFFER/CLOCK DRIVER FAN OUT BUFFER
IDT™ / ICS™
BUFFER/CLOCK DRIVER 13
ICSLV810 REV G 121709
Revision History
Rev. Originator Date Description of Change
A P.Griffith 03/25/05 New device/datasheet.
B P.Griffith 05/02/05 Released from Preliminary to final; changed Short Circuit Current parameter in 2.5 V DC
Char table to ±80 mA; changed Short Circuit Current parameter in 1.5 V DC Char table to
±35 mA
C P.Griffith 05/12/05 Added bullet in “Features” for operating voltage of 2.5 V on Bank A and specified that
operating voltages of 1.5 and 2.5 V are on Banks B and C; changed block diagram input
and pin 1 from IN to CLKIN; removed +1.5 V spec from pin 4 and pin 8 descriptions; added
“VDDA + 1.2 V” to “All Inputs and Outputs” section of Absolute Maximum Ratings; added
min and max values for Banks A, B, and C “Power Supply Voltage” in Recommended
Operating Conditions; expanded DC Electrical Char tables in to include a separate table
for Banks A, B, and C; expanded AC Electrical Char tables in to include a separate table
for Banks A, B, and C;
D P.Griffith 06/21/05 Added 209 mil 20-pin SSOP package and ordering info.
E K. Beckmeyer 07/27/05 Specified operating voltage on Bank A from 1.5V to 2.5V; Added figures 4 and 5 on page
10 to explain Pulse Skew and Part-to-Part Skew; Changed Output Frequency Max
Specification to 133MHz in AC Electrical Char tables for Banks A, B, and C; Added Duty
Cycle Spec for VDD = 1.5V in AC Electrical Char tables for Banks A, B, C; Changed CLK
conditions in DC Electrical Char tables on Banks B and C; removed SOIC package.
F K. Beckmeyer 10/13/05 Added “LF” packaging and ordering info to both “R” and”F” packages.
G 12/17/09 Added EOL note for non-gren parts.