OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC365S8GE

P1-P3P4-P6P7-P7
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 46
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
Absolute Maximum Ratings
Outline Drawing
Note: Divider will operate over full voltage range shown above
Typical Supply Current vs. Vcc
RF Input (Vcc = +5V) +13 dBm
Vcc +5.5V
Junction Temperature 135 °C
Continuous Pdiss (T= 85°C)
(derate 15 mW/°C above 85°C)
760 mW
Thermal Resistance (RTH)
(junction to ground paddle)
65.8 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to to +85 °C
Vcc (V) Icc (mA)
4.75 94
5.0 110
5.25 118
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
HMC365S8G / 365S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
v04.0506
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC365S8G Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
HMC365
XXXX
HMC365S8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
HMC365
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
-700
-500
-300
-100
100
300
500
700
22.7 23.1 23.5 23.9 24.3 24.7
AMPLITUDE (mV)
TIME (nS)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 47
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Description
Pin Number Function Description Interface Schematic
1 OUT Divided output 180° out of phase with pin 3.
2, 6 N/C No connection. These pins must not be grounded.
3 OUT Divided Output.
4 Vcc Supply voltage 5V ± 0.25V.
5 IN RF Input must be DC blocked.
7IN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8GND
Ground Backside of package has exposed metal ground paddle which
must be connected to ground.
HMC365S8G / 365S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
v04.0506
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
List of Materials for Evaluation PCB 104631
[1]
The circuit board used in the  nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
Item Description
J1 - J3 PCB Mount SMA RF Connector
C1 - C4 100 pF Capacitor, 0402 Pkg.
C5 1000 pF Capacitor, 0603 Pkg.
C6 10 μF Tantalum Capacitor
U1 HMC365S8G / HMC365S8GE Divide-by-4
PCB
[2]
104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
HMC365S8G / 365S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
v04.0506
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P7

HMC365S8GE

Mfr. #:
Buy HMC365S8GE
Manufacturer:
Analog Devices / Hittite
Description:
Prescaler InGaP HBT Divide-by-4 SMT, DC - 13 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet