OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PW172KB0503F01

P1-P3
1 of 3
______________________________________________________________________________________________________________________________
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
Line and Load
Voltage Regulation
Excluding Cord
Line: +/-1%
Load: +/-5%
Ripple
1% Vp-p max.
Transient Response
0.5mS for 50% Load Change,
typical.
Protection
Overcurrent Protection
(Hiccup).
Short Circuit Protection
Input Voltage Range
Universal Input 100-240VAC, -10%, +10%
Line Frequency
47-63Hz
Input Current
90 VAC 0.4A, max.
Protection
Internal Primary Current Fuse,
Inrush Limiting
Thermal
Performance
Operating Temperature
full load, no derating,
convection cooling, Non-
vented case
0
°
C to 40
°
C
Relative Humidity
Non-condensing 5% to 95%
Altitude
0 to 10,000 feet
Output Specifications
Input Specifications
Environmental Specifications
Topology
Switching - Fixed Frequency
Flyback
Efficiency
Designed to meet EISA
Requirements - see page 3
Hold-up Time
@ 115VAC 18mS, min.
Dialectric Withstand
4,000VAC or 5,656VDC
Primary-Secondary;
1,500VAC or 2,150VDC
Primary - F.G;
500VDC Secondary - F.G.
Storage Temp. -30
°
C to 85
°
C
Approvals and
Safety Standards
UL60601-1
IEC/EN60601-1
EMC: EN60601-1-2/
EN55024
MTBF
100,000 Calculated Hours
Case and
Dimensions
Desktop Style:
3.3"L x 1.81"W x 1.26"H
84.6mm L x 46mm W x 33mm
H
Case Material
Black 94V0 Polycarbonate
Cord and
Connectors
18AWG, 1,800mm 2
conductor. (5V, 6V model:
1,500mm). Ault #3 connector.
Other connectors are
available.
General Specifications
MW172KB
Universal 15 – 18 Watt Series
Medical Switch-Mode Power Supply
3 Year Warranty
•
100-240VAC Universal Input
•
Desktop and Wall-Plug Style with Interchangeable
Blades* ( Kit sold separately)
•
3.3V to 24V Single Output Models, up to 18W
•
Modified and Custom Designs
•
Regulated Output with Low Ripple
•
Impact-Resistant Polycarbonate Enclosure
•
No load Power Consumption < 0.50W
•
Designed to meet EISA Requirements (see page 3 for
details).
Specifications
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
2 of 3
______________________________________________________________________________________________________________________________
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
WALL-PLUG OPTIONS
IEC320 IEC320 IEC320 N. America N. America Europe United Australia
C14 C18 C8 Japan Japan Kingdom
Grounded Ungrounded "Shaver"
Interchangeable
Fixed Fixed Fixed Fixed
(Q)
(N)
(B)
(C)
(M)
(G)
Notes:
3. Blade Kit is available which will include one each of a EU, UK, and Aust blade. Kit part number is KT1027K . Can
be used with (B) version only, to allow blades to be interchanged.
Input Receptacle Options
1. For Desktop options, choose the applicable letter above.
2. For Wall-plug options, choose the applicable letter above. The model will then be fitted only with the receptacle
chosen. The North American blade version (B) will be an interchangeable blade. The other options (C), (M), (G), and
(E), will be fixed blades molded in the case.
DESKTOP OPTIONS
Product Family
K
Manufacturing Location
B
Design Revision Changes
05
Output Voltage: 05=5V, 06=6V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V, 48=48V.
03
Output Connector. "03" connector is standard. See below. Other output connectors
available. Contact the factory for more details
Model Number Key
F
Input Receptacle. See Below for options. "F" receptacle (IEC320, C14 type,
grounded) is standard.
01
Modification Designator. "01" is standared part, "02" and higher denotes a modified
model.
MW172
OUTPUT PARAMETERS
Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max)
MW172KB0503F01 5 V 3.00 A 15.0 W 50mV
MW172KB0603F01 6 V 2.50 A 15.0 W 60mV
MW172KB0903F01 9 V 2.00 A 18.0 W 90mV
MW172KB1203F01 12 V 1.50 A 18.0 W 120mV
MW172KB1503F01 15 V 1.20 A 18.0 W 150mV
MW172KB1803F01 18 V 1.00 A 18.0 W 180mV
MW172KB2403F01 24 V 0.75 A 18.0 W 240mV
Note: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.
MW172KB
Universal 15-18 Watt Series
Medical Switch Mode Power Supply
3 Year Warranty
3 of 3
______________________________________________________________________________________________________________________________
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
2007 Energy Independence and Security Act - EISA
The Energy Independence and Security Act of 2007 was passed in December of 2007 and addresses minimum efficiency standards
and standby levels for Class A external power supplies that are 250 Watts and under. This law stipulates that external power
supplies manufactured on July 1, 2008 and beyond meet certain minimum efficiency and standby criteria as defined below.
Minimum Efficiency Criteria:
Active mode is defined as when a power supply’s input is connected to a line voltage AC and it’s output is connected to a DC or AC
load, drawing a portion of the product’s power output. Depending upon the power rating for the power supply, it must meet the
minimum efficiency criteria outlined below.
Energy-Efficiency Criteria for Active Mode:
Output Power on Adapter Label
0 to < 1 Watt
> 1 watt to ≤ 51 watts
> 51 watts
Minimum Average Efficiency Percentage
≥ 0.50 * output power on the label
≥ [0.09 * Ln (output power on adapter label)] + 0.50
≥ 0.85
Energy Consumption Criteria for No Load Mode:
The power supply must also meet a requirement for when its input is connected to line voltage AC but its output is not connected to a
load. Depending upon the power output of the supply, it must keep its energy consumption below the following values:
Output Power on Adapter Label
0 to < 250 Watts
Maximum Power Consumption in No-Load Mode
≤ 0.50 watts
Notes: 1. Center Contact = Positive
2. Connector is Switchcraft 760 plug or equivalent.
3. Suggested Mating Connector is Switchcraft 712A jack or equivalent.
Output Connector Information
4. Other output connector options are available. Contact your local representative for
details.
Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 2-15-2009
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
MW170KB
Universal 15-18 Watt Power Supply
Medical Switch Mode Power Supply 3 Year Warranty
P1-P3

PW172KB0503F01

Mfr. #:
Buy PW172KB0503F01
Manufacturer:
Description:
Plug-In AC Adapters Desktop AC Adapters 15.0W 5V 3.00A Energy Star IV
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet