D
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
2.25 amps @ 28 VDC; 1.0 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: In excess of 750,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
GLASS EPOXY INSULATION SWITCHES - 20° INDEXING
ADJUSTABLE STOPS SET @ 2 POS. - SOLDER LUG TERMINALS
SPECIFICATIONS AND ORDERING INFORMATION
D8 - SERIES
2 5/16" DIAMETER 2.25 AMPS @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy.
Index: Dual-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 20° standard.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGE 57.
STANDARD CONSTRUCTION
D8G - GLASS EPOXY
CONSTRUCTION
32
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
The D8 Series switches are heavy duty, 18 position, 20° index, and glass
epoxy insulation. Double eyelet construction is standard to assist in
supporting larger wiring harness applications. Positive indexing is provided
by a dual-ball, hill and valley index assembly.
01 02-17 1 1 D8G0117S D8G0117N DT
02 02-17 1 2 D8G0217S D8G0217N DT
03 02-17 1 3 D8G0317S D8G0317N DT
04 02-17 1 4 D8G0417S D8G0417N DT
05 02-17 1 5 D8G0517S D8G0517N DT
06 02-17 1 6 D8G0617S D8G0617N DT
07 02-17 1 7 D8G0717S D8G0717N DT
08 02-17 1 8 D8G0817S D8G0817N DT
