TRIPLE 10-BIT LVDS TRANSMITTER FOR VIDEO
V103
V103 Datasheet 4 11/23/06 Revision 2.0
Integrated Circuit Systems • 525 Race Street, San Jose, CA 95126 • tel (408) 297-1201 • www.icst.com
External Components
Decoupling capacitors should be used for all power pins. The V103 requires no other external components.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the V103. These ratings, which
are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the
device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Recommended Operation Conditions
Item Rating
Supply Voltage, VCC -0.3 V to +4.0 V
CMOS/TTL Input Voltage -0.3 V to VCC+0.3 V
CMOS/TTL Output Voltage -0.3 V to VCC+0.3 V
LVDS Driver Output Voltage -0.3 V to VCC+0.3 V
Storage Temperature -55 to +150°C
Junction Temperature 120°C
Soldering Temperature (10 seconds) 260°C
Maximum Power Dissipation @ 25°C 1.0 W
Parameter
Min. Typ. Max. Units
Ambient Operating Temperature 0 +70 °C
Power Supply Voltage (measured in respect to GND) +3.0 +3.3 +3.6 V
TRIPLE 10-BIT LVDS TRANSMITTER FOR VIDEO
V103
V103 Datasheet 5 11/23/06 Revision 2.0
Integrated Circuit Systems • 525 Race Street, San Jose, CA 95126 • tel (408) 297-1201 • www.icst.com
DC Electrical Characteristics
VDD=3.3 V ±10%, Ambient temperature 0 to +70°C
Parameter Symbol Conditions Min. Typ. Max. Units
CMOS/TTL Inputs, Standard Configuration
Input High Voltage V
IH
RS=VCC or GND 2.00 VCC V
Input Low Voltage V
IL
RS=VCC or GND GND 0.80 V
Input Current I
INC
0V<VIN<VCC ±10 µA
CMOS/TTL Inputs, Small Input Swing Configuration
Max Input Swing Voltage V
DDQ
1
V
REF
= V
RS
= V
DDQ
/2
1.2 2.8 V
Input Reference Voltage into pin RS V
REF
V
DDQ
/2 V
High Level Input Voltage
(for small input swing condition)
V
SH
2
V
REF
=V
DDQ
/2 V
DDQ
/2
+0.1V
V
Low Level Input Voltage
(for small input swing condition)
V
SL
2
V
REF
=V
DDQ
/2 V
DDQ
/2
-0.1V
V
Note 1: V
DDQ
voltage defines the max voltage of the small swing input and is not an actual input into the device.
Note 2: Small input swing voltage is applied to TA[6:0], TB[6:0], TC[6:0], TD[6:0], TE[6:0], and CLKIN.
LVDS Transmitter DC Specifications
Differential Output Voltage,
R
L
= 100
V
OD
Normal swing
RS = VCC
250 350 450 mV
Reduced swing
RS = GND
100 200 300 mV
Change in V
OD
Between Complimentary
Output States
DV
OD
RL = 100
35 mV
Common Mode Voltage V
OC
1.125 1.250 1.375 V
Change in V
OC
Between Complimentary
Output States
DV
OC
35 mV
Output Short Circuit Current I
OS
V
OUT
= 0V, RL = 100 -24 mA
Output Tri-State Current I
OZ
/PWDN = 0V,
V
OUT
= 0V to VCC
±10 µA
Supply Current
Transmitter Supply Current I
TCCG
R
L
= 100, C
L
=5 pF,
VCC = 3.3 V, RS = VCC
Gray Scale Pattern
f = 85 MHz 58 64 mA
f =135 MHz 70 76 mA
R
L
= 100, C
L
=5 pF,
VCC = 3.3 V, RS = GND
Gray Scale Pattern
f = 85 MHz 44 50 mA
f =135 MHz 56 62 mA
Transmitter Supply Current I
TCCW
R
L
= 100, C
L
= 5 pF,
VCC = 3.3 V, RS = VCC
Worst Case Pattern
f = 85 MHz 69 75 mA
f =135 MHz 87 93 mA
R
L
= 100, C
L
= 5 pF,
VCC = 3.3 V, RS = GND
Worst Case Pattern
f = 85 MHz 55 61 mA
f =135 MHz 73 79 mA
Transmitter Power Down Supply Current I
TCCS
/PWDN = L 10 µA
TRIPLE 10-BIT LVDS TRANSMITTER FOR VIDEO
V103
V103 Datasheet 6 11/23/06 Revision 2.0
Integrated Circuit Systems • 525 Race Street, San Jose, CA 95126 • tel (408) 297-1201 • www.icst.com
Gray Scale Pattern
Worst Case Pattern
AC Electrical Characteristics
CLKIN
Tx 0
Tx 1
Tx 2
Tx 3
Tx 4
Tx 5
Tx 6
x = A, B, C, D, E
CLKIN
Tx0
Tx1
Tx2
Tx3
Tx4
Tx5
Tx6
x = A, B, C, D, E

V103YLF

Mfr. #:
Manufacturer:
IDT
Description:
LVDS Interface IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet