AN44075A
6
SDL00013BEB
Absolute Maximum Ratings
Operating Supply Voltage Range
10.0 to 35.0
V
M
Range
⎯
VSupply voltage range
NoteUnitSymbolParameter
*2, *3A3.0I
f
Flywheel diode current (pin 3, pin 14)7
*2, *3A
±3.0
I
OUT
Motor drive current (pin 3, pin 14) 6
*2V37V
OUT
Output pin voltage (pin 3, pin 14)5
*5
°C
–55 to +150T
stg
Storage temperature4
NoteUnitRatingSymbolParameterA No.
*5
°C
–20 to +70T
opr
Operating ambient temperature3
*4W0.466P
D
Power dissipation2
*1V37V
M
Supply voltage (pin 1, pin 16)1
Note) *1: The range under absolute maximum ratings, power dissipation.
*2: Do not apply external currents to any pin specially mentioned. For circuit currents, (+) denotes current flowing into the IC and (–) denotes
current flowing out of the IC.
*3: Rating when cooling fin on the back side of the IC is connected to the GND pattern of the glass epoxy 4-layer board.
(GND area: 2nd-layer or 3rd-layer: more than 1 500 mm
2
)
In case of no cooling fin on the back side of the IC, rating current is 1.5 A on the glass epoxy 2-layer board.
*4: Power dissipation shows the value of only package at T
a
= 70°C.
When using this IC, refer to the • P
D
–T
a
diagram in the Technical Data and use under the condition not exceeding the allowable value.
*5: Expect for the storage temperature and operating ambient temperature, all ratings are for T
a
= 25°C.
Note) The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
