HR34B-12WLPD-10S Datasheet HR34B-12WR-C, HR34B-12WLPK-10SC, HR34B-12WPD-10SC | P7-P8

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

BConnector Mating Combinations

Straight, Wire Solder (Standard key position)

HR34B-12WPD-4S

HR34B-12WPE-4S

Wire solder (Standard key position)

HR34B-12WRB-4P

Wire solder (X key position)

HR34B-12WRB-4P-X

Right angle, Wire Solder (Standard key position)

HR34B-12WLPD-4S

HR34B-12WLPE-4S

Straight, Wire Solder (X key position)

HR34B-12WPD-4S-X

HR34B-12WPE-4S-X

Right angle, Wire Solder (X key position)

HR34B-12WLPD-4S-X

HR34B-12WLPE-4S-X

4 pos. Plugs 4 pos. Receptacles

Standard key position

X key position

Standard

key position

Straight, Wire Solder or Crimp

HR34B-12WPA-10S(71),10SC HR34B-12WPB-10S(71),10SC

HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC

HR34B-12WPK-10S,10SC

Right angle, Wire Solder or Crimp

HR34B-12WLPA-10S(71),10SC HR34B-12WLPB-10S(71),10SC

HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC

HR34B-12WLPK-10S,10SC

Wire Solder

HR34B-12WRA-10P

10 pos. Plugs 10 pos. Receptacles

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

BApplicable tools

Description Part No. HRS No. Applicable contact Applicable cable

Manual contact crimping tool

Press

Applicator

Contact extraction tool

HT304/HR34B-1

CM-105C

AP105-HR34B-1

RP6-SC-TP

150-0107-9

901-0001-0

901-2051-2

150-0039-0

HR34B-SC1-111

HR34B-SC1-211

HR34B-SC1-111

HR34B-SC1-211

20AWG,23AWG,25AWG

20 to 25AWG

---------------

◆

Manual contact crimping tool

◆

Press CM-105C (Applicator

ordered separate)

◆Contact extraction tool

BHandling

BPrecautions

1. Mating 2. Un-mating

Holding the plug by the outer shell (A) align the arrow on the plug

with the alignment mark on the receptacle and push straight in.

Rotate the sleeve (B) counter-clockwise to a full stop and un-mate

the plug from the receptacle.

Plug

Mating position alignment marks

Receptacle

Rotate counter-clockwise

1. When disconnecting or inserting the connector, be sure to do so after turning off the power.

2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below

(i.e., the mating mark of the receptacle).

3. Note that the display method of the mating mark will differ depending on the receptacle.

4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.

5. Please consult Hirose Electric Sales for harness assembly procedure.

Center line of the connector

1 mm max.

Alignment mark

When completely mated and locked the alignment

arrow on the plug must line-up with the center line of

the connector (alignment mark on the receptacle).

If the alignment arrow and the center line of the

connectors are not aligned (1 mm max.) re-insert

the plug until they are aligned.

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL:

81-45-620-3526 Fax:

81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

P1-P3 P4-P6 P7-P8

HR34B-12WLPD-10S

Mfr. #:

Buy HR34B-12WLPD-10S

Manufacturer:

Hirose Electric

Description:

Standard Circular Connector 10P R/A SOLDER PLUG FEMALE CONT

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HR34B-12WLPD-10S

HR34B-12WLPD-10S

Products related to this Datasheet