MC100EP016A
http://onsemi.com
6
Table 6. 100EP DC CHARACTERISTICS, PECL V
CC
= 3.3 V, V
EE
= 0 V (Note 2)
Symbol Characteristic
-40°C 25°C 70°C
Unit
Min Typ Max Min Typ Max Min Typ Max
I
EE
Power Supply Current 130 170 210 130 177 210 130 180 210 mA
V
OH
Output HIGH Voltage (Note 3) 2155 2280 2405 2155 2280 2405 2155 2280 2405 mV
V
OL
Output LOW Voltage (Note 3) 1355 1480 1605 1355 1480 1605 1355 1480 1605 mV
V
IH
Input HIGH Voltage (Single-Ended) 2075 2420 2075 2420 2075 2420 mV
V
IL
Input LOW Voltage (Single-Ended) 1355 1675 1355 1675 1355 1675 mV
V
BB
Output Voltage Reference 1775 1875 1975 1775 1875 1975 1775 1875 1975 mV
V
IHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 4)
2.0 3.3 2.0 3.3 2.0 3.3 V
I
IH
Input HIGH Current 150 150 150
mA
I
IL
Input LOW Current 0.5 0.5 0.5
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
2. Input and output parameters vary 1:1 with V
CC
. V
EE
can vary +0.3 V to -0.3 V.
3. All loading with 50 ohms to V
CC
-2.0 volts.
4. V
IHCMR
min varies 1:1 with V
EE
, V
IHCMR
max varies 1:1 with V
CC
. The V
IHCMR
range is referenced to the most positive side of the differential
input signal.
Table 7. 100EP DC CHARACTERISTICS, NECL V
CC
= 0 V, V
EE
= -3.6 V to -3.0 V (Note 5)
Symbol Characteristic
-40°C 25°C 70°C
Unit
Min Typ Max Min Typ Max Min Typ Max
I
EE
Power Supply Current 130 170 210 130 177 210 130 180 210 mA
V
OH
Output HIGH Voltage (Note 6) -1145 -1020 -895 -1145 -1020 -895 -1145 -1020 -895 mV
V
OL
Output LOW Voltage (Note 6) -1945 -1820 -1695 -1945 -1820 -1695 -1945 -1820 -1695 mV
V
IH
Input HIGH Voltage (Single-Ended) -1225 -880 -1225 -880 -1225 -880 mV
V
IL
Input LOW Voltage (Single-Ended) -1945 -1625 -1945 -1625 -1945 -1625 mV
V
BB
Output Voltage Reference -1525 -1425 -1325 -1525 -1425 -1325 -1525 -1425 -1325 mV
V
IHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 7)
V
EE
+2.0 0.0 V
EE
+2.0 0.0 V
EE
+2.0 0.0 V
I
IH
Input HIGH Current 150 150 150
mA
I
IL
Input LOW Current 0.5 0.5 0.5
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with V
CC
.
6. All loading with 50 ohms to V
CC
-2.0 volts.
7. V
IHCMR
min varies 1:1 with V
EE
, V
IHCMR
max varies 1:1 with V
CC
. The V
IHCMR
range is referenced to the most positive side of the differential
input signal.