4
Optical Characteristics at T
A
= 25˚C
Luminous Color, Viewing Luminous
Intensity Peak Dominant Angle Ecacy
I
V
(mcd) Wavelength Wavelength 2 T
1/2
K
V
@ 20 mA
[1]
O
peak
(nm) O
d
[2]
(nm) Degrees
[3]
(lm/w)
Part Number Color Min. Typ. Typ. Typ. Typ. Typ.
HSMM-C110 Green 45 126 523 525 130 490
HSMM-C120 Green 45 120 523 525 155 490
HSMM-C170/C190/ Green 45 120 523 525 170 490
/C150
HSMN-C110 Blue 11.2 39 468 470 130 77
HSMN-C120 Blue 11.2 35 468 470 155 80
HSMN-C170/C190/ Blue 11.2 35 468 470 170 77
C191/C150
Notes:
1. The luminous intensity, I
V
, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package.
2. The dominant wavelength, O
d
, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. T
1/2
is the o-axis angle where the luminous intensity is 1/2 the peak intensity.
Color Bin Limits
[1]
Light Intensity (Iv) Bin Limits
[1]
Intensity (mcd) Intensity (mcd)
Bin ID Min. Max. Bin ID Min. Max.
A 0.11 0.18 N 28.50 45.00
B 0.18 0.29 P 45.00 71.50
C 0.29 0.45 Q 71.50 112.50
D 0.45 0.72 R 112.50 180.00
E 0.72 1.10 S 180.00 285.00
F 1.10 1.80 T 285.00 450.00
G 1.80 2.80 U 450.00 715.00
H 2.80 4.50 V 715.00 1125.00
J 4.50 7.20 W 1125.00 1800.00
K 7.20 11.20 X 1800.00 2850.00
L 11.20 18.00 Y 2850.00 4500.00
M 18.00 28.50
Note:
1. Bin categories are established for classication of products. Products may not be available in all
categories. Please contact your Avago representative for information on currently available bins.
2. The Iv binning specication set-up is for lowest allowable Iv binning only. There is no upper Iv bin
limits.
Note:
1. Bin categories are established for class-
ication of products. Products may not be
available in all categories. Please contact
your Avago representative for information
on currently available bins.
Blue Color Bins
[1]
Dom. Wavelength (nm)
Bin ID Min. Max.
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
Tolerance: ± 1 nm
InGaN Green
Color Bins
[1]
Dom. Wavelength (nm)
Bin ID Min. Max.
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Tolerance: ± 1 nm
Tolerance: ± 15%
