ENVIRONMENTAL
Parameter Condition
Operating Temperature Range
3.3Vout, ±5Vout
without derating
with derating
-40°C to +65°C
-40°C to +100°C
all others
without derating
withderating
-40°C to +72°C
-40°C to +100°C
Maximum Case Temperature +100°C
Temperature Coefficient ±0.02%/°C max.
Thermal Impedance Natural convection (20LFM) 20°C/Watt typ.
Operating Humidity 5% - 95% RH
Thermal Shock MIL-STD-810F
Vibration MIL-STD-810F
MTBF
MIL-HDBK-217F
Bellcoe TR-NWT-000332
(8)
2064 x 10
3
hours
2750 x 10³ hours
PD-4
REV.: 1/2016 www.recom-power.com
DC/DC Converter
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted
RP12-A
Series
-40 60
72
80
10040
200-20
0
20
40
60
80
100
Ambient Temperature [°C]
Output Power [%]
Derating Graph
(9)
Notes:
Note8: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
Note9: Derating graphs are valid only for the shown part numbers. If you need detailed derating- information about a
part-number not shown here please contact our technical support service at techsupportAT@recom-power.com.
RP12-4815SA
PROTECTIONS
Parameter Condition Value
Short Circuit Protection (SCP) continuous, automatic recovery
Over Voltage Protection (OVP)
Zener Diode Clamp
3.3Vout
5.1Vout
12Vout
15Vout
3.9VDC
6.2VDC
15VDC
18VDC
Over Load Protection (OLP) % of Iout rated 150% typ.
Isolation Voltage
DIP24
I/P to O/P
I/P (O/P) to case
1.6kVDC/1 minute
1.6kVDC/1 minute
SMD
I/P to O/P
I/P (O/P) to case
1.6kVDC/1 minute
1.0kVDC/1 minute
Isolation Resistance 500VDC 1GΩ min.
Isolation Capacitance 1200pF max.
Notes:
Note7: This power module is not internally fused. An input line fuse must always be used.