AA3021ZGSK Datasheet AA3021ZGSK | P1-P3

SPEC NO: DSAM6456 REV NO: V.2B DATE: SEP/23/2013 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1201008407

3.0x2.0mm SURFACE MOUNT LED LAMP

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Part Number: AA3021ZGSK Green

Features

z 3.0mm x 2.0mm, 1.3mm high, only minimum space required.

z Suitable for compact optoelectronic applications.

z Low power consumption.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Green source color devices are made with InGaN

on Sapphire Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.008") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAM6456 REV NO: V.2B DATE: SEP/23/2013 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1201008407

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or

damage the internal circuitry.

4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.

4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.

4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup

and avoid damage during production.

5. As silicone encapsulation is permeable to gases, some corrosive substances such as H

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

SPEC NO: DSAM6456 REV NO: V.2B DATE: SEP/23/2013 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1201008407

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

3. Wavelength value is traceable to the CIE127-2007 compliant national standards.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Part No. Dice Lens Type

iewing

Angle [1]

Min. Typ. 2θ1/2

AA3021ZGSK Green (InGaN) Water Clear 400 700

125

Iv (mcd) [2]

@ 20mA

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Green 515 nm I

F=20mA

λD [1] Dominant Wavelength Green 525 nm I

F=20mA

Δλ1/2 Spectral Line Half-width Green 35 nm I

F=20mA

C Capacitance Green 45 pF V

F=0V;f=1MHz

F [2] Forward Voltage Green 3.3 4.1 V IF=20mA

R Reverse Current Green 50 uA VR=5V

Parameter Green Units

Power dissipation 102.5 mW

DC Forward Current 25 mA

Peak Forward Current [1] 150 mA

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

P1-P3 P4-P6

AA3021ZGSK

Mfr. #:

Buy AA3021ZGSK

Manufacturer:

Kingbright

Description:

Standard LEDs - SMD 3.0X2.0MM GRN SMD LED

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AA3021ZGSK