Features
■ Conductive plastic
■ Linear tapers
■ Audio tapers available
■ PC board and bushing mount
■ Plastic bushing and plastic shaft
■ Withstands typical industrial washing
processes
■ RoHS compliant* version available
3360 - 6 mm Square Sealed Panel Control
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Standard Resistance Range
Linear ..............1K ohms to 1 megohm
Total Resistance Tolerance
Linear Tapers ............................±20 %
Independent Linearity .....................±5 %
Absolute Minimum Resistance
............................2 % or 2 ohms max.
......................... (whichever is greater)
Effective Electrical Angle ..240 ° nominal
Contact Resistance Variation
............................1 % or 3 ohms max.
(whichever is greater)
Dielectric Withstanding Voltage
(MIL-STD-202 – Method 301)
Sea Level .............. 900 VAC minimum
70,000 Feet ........... 350 VAC minimum
Insulation Resistance
.................. 1,000 megohms minimum
Power Rating @ 70 °C
(Derate to 0 at 125 °C
Voltage Limited By Power Dissipation
or 200 VAC, Whichever is Less)
............................................. .25 watts
Audio Tapers .................... 0.125 watts
Theoretical Resolution
............................... Essentially infi nite
Environmental Characteristics
Operating Temperature Range
.................................+1 °C to +125 °C
Storage Temperature Range
................................-55 °C to +125 °C
Temperature Coeffi cient
Over Storage Temperature Range
................................... ±1,000 ppm/°C
Vibration ......................................... 30 G
Total Resistance Shift .... ±2 % maximum
Voltage Ratio Shift..... ±2 % maximum
Shock............................................ 100 G
Total Resistance Shift ... ±2 % maximum
Voltage Ratio Shift...... ±2 % maximum
Load Life ............................. 1,000 Hours
Total Resistance Shift
......................... ±10 % TRS maximum
Rotational Life (No Load) .. 50,000 Cycles
Total Resistance Shift
........................... ±5 % TRS maximum
Contact Resistance Variation
....................................3 % or 3 ohms,
whichever is greater
Moisture Resistance ........ MIL-STD-202,
Method 103, Condition B
Total Resistance Shift
......................... ±10 % TRS maximum
IP Rating .........................................IP 67
*RoHS COMPLIANT
VERSIONS
AVAILABLE
How To Order
3360 Y - 1 - 103 LF
Model
Terminal Style Designator
Single Cup:
C = In-line Straight
Terminals Side Exit
P = 5.08 mm x 2.54 mm
Triangular Pattern
Rear Exit
Y = 5.08 mm x 5.08 mm
Triangular Pattern
Rear Exit
Bushing Designator
1 = Standard
Resistance Code
Terminations
LF = 100 % Tin-plated (RoHS compliant)
Blank = 90 % Tin / 10 % Lead-plated
(Standard)
Standard Resistance Table
Resistance Resistance
(Ohms) Code
1,000 102
2,000 202
5,000 502
10,000 103
20,000 203
50,000 503
100,000 104
200,000 204
500,000 504
1,000,000 105
Physical Characteristics
Stop Strength......... 5.65 N-cm (8 oz.-in.)
Mechanical Angle .............310 ° nominal
Torque
Starting
........3.53 N-cm (5.0 oz.-in.) maximum
Running
........3.53 N-cm (5.0 oz.-in.) maximum
Mounting (Torque on Bushing)
............17 N-cm (1.5 lb.-in.) maximum
[plastic bushing]
Weight ...................................4.5 grams
Terminals ....................... Solderable pins
Soldering Condition
..........5 seconds at 360 °C maximum.
Recommended hand soldering
using Sn95/Ag5 no clean solder,
0.025 wire diameter.
Marking ......... Manufacturer ’s trademark,
model number, product code,
terminal style, resistance code
and date code
Flammability ........ Conforms to UL94V-0
Epoxy................... Conforms to UL94V-1
Hardware (purchased separately)
Nut ............................................H-38-1
Washer .....................................H-37-5
Popular distribution resistance values listed in
boldface. Special resistances available.
3360 Y 503
247C0
