HARDWARE MOUNTING
The IE-MiniMc can be mounted on a DIN rail or using wall
mount brackets (shown below).
DIN rail clips (part number 806-39105) and wall mount
brackets (part number 895-39229) are available for purchase
through a B&B Electronics Distributor.
DIN Rail Clips
The MiniMc can be mounted
with two DIN Rail clips, a
hardware option available
through B&B Electronics. The
DIN Rail clips include screws,
to allow the installation onto a
DIN Rail. Install the screws
into DIN Rail clips, which
should be mounted
perpendicular to the DIN Rail.
Snap the converter onto the
clips. To remove the converter
from the DIN Rail, use a flat-
head screwdriver into the slot
to gently pry the converter
from the rail.
7
