Heat Sinking and Mounting
The Endor Star™ has six mounting points for #4 screws. It should be attached to additional heat
sinking for proper thermal management. At minimum, a heat sink of a metal plate (copper or
aluminum), attached using a thermal interface material, (such as LUXdrive HexaTherm™ A001),
should be used to increase the area exposed to free air. The Endor Star
™
Metal Core Printed Circuit
Board has a backing plate that is electrically isolated from the emitter. It is not necessary to use an
electrically insulated thermal interface material.
Drivers
LUXdrive oers a line of drivers designed for use with high-power LED modules such as the
Endor Star™. The choice of driver will depend upon number of modules to be driven, the input
voltage source, and the desired forward drive current. See the full line of LUXdrive products at
www.LUXdrive.com
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com .
Specications subject to change without notice. Dec, 2010 - Rev 2.0
M
a
d
e
i
n
t
h
e
U
S
A
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
Optics
The Endor Star
™
can be tted with many dierent optics from major optics manufacturers. On the
7040 there are four indentations on the board, designed as registration holes for the Carclo1041x
series of optics. These small 10mm optics are avilable in multiple viewing angles and work
extremely well in applications where a low prole is desired.
On the 7007 there are three holes in the board, designed to hold the Carclo CO-105xx series of
optics. These 20mm optics are available in multiple viewing angles 16°, 22°, 26°, 37°, and 43 x 16°.
Part Number
Full Width
Viewing Angle
16°
Compatible With
A008
CO-10507
Number of
LEDs
3
Description
Narrow Spot
26°
37°
A008
A008CO-10509
CO-10508
3
3
43° x 16° A008CO-10510
3
Frosted Wide
Frosted Medium
Elliptical
22° A008CO-10511
3
Frosted Narrow
Endor Star
Optics
TYPE
Table 5
Part Number
Compatible With
7007 & 7040
7007 & 7040
A001-010H
A001-150H
Number of
Parts
10
150
Description
HexaTherm™ Thermal Adhesive
HexaTherm™ Thermal Adhesive
Table 3
High-Power LED Light Module
7007/7040 Endor Star
TM
DATA SHEET Page 4 of 5