IHLP-1616BZ-0H
www.vishay.com
Vishay Dale
Revision: 26-Sep-17
1
Document Number: 34452
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Frequency, Low Profile, High Current IHLP
®
Inductors
DESIGN SUPPORT TOOLS click logo to get started
FEATURES
• Shielded construction
• Extended frequency range up to 10 MHz
• Lowest losses above 1 MHz
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite
construction
• IHLP design. PATENT(S): www.vishay.com/patents
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
• Notebook / desktop applications
• High current POL converters
• Low profile, high current power supplies
• Battery powered devices
• PMIC for sensors and cameras
Notes
• All test data is referenced to 25 °C ambient
• Operating temperature range -55 °C to +125 °C
• The part temperature (ambient + temp rise) should not exceed 125°C under worst case operating conditions. Circuit design, component
placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application
• Rated operating voltage (across inductor) = 50 V
(1)
DC current (A) that will cause an approximate T of 40 °C
(2)
DC current (A) that will cause L
0
to drop approximately 20 %
(3)
DC current (A) that will cause L
0
to drop approximately 30 %
PATENT(S): www.vishay.com/patents
This Vishay product is protected by one or more United States and International patents.
STANDARD ELECTRICAL SPECIFICATIONS
L
0
INDUCTANCE
± 20 %
AT 100 kHz,
0.25 V, 0 A
(μH)
DCR
TYP.
25 °C
(m)
DCR
MAX.
25 °C
(m)
HEAT
RATING
CURRENT
DC TYP.
(A)
(1)
SATURATION
CURRENT
DC TYP.
(A)
(2)
SATURATION
CURRENT
DC TYP.
(A)
(3)
SRF
TYP.
(MHz)
0.10 5.5 5.9 14.0 36.0 45.0 485
0.47 13.2 14.1 8.5 13.1 17.5 145
1.00 26.6 28.5 6.1 10.3 13.0 91
DIMENSIONS in inches [millimeters]
0.030 ± 0.012
[0.76 ± 0.30]
0.079
[2.0]
Max.
Typical Pad Layout
0.076
[1.930]
0.090
[2.286]
0.222
[5.639]
0.160 ± 0.010
[4.06 ± 0.254]
0.160 ± 0.010
[4.06 ± 0.254]
0.175 ± 0.010
[4.45 ± 0.254]
0.080 ± 0.002
[2.0 ± 0.05]
