JE-X
RELAYS
COMPACT ECONOMICAL
POWER RELAYS
mm inch
18.7
.736
14
.551
22
.866
FEATURES
• Compact size - Height Max. 18.7 mm .736 inch
lower than JY relay (22.5 mm) (.886 inch)
• High contact capacity — 5A 125 V AC
• Safety-oriented between coil and contact terminals
• All plastic materials: UL flame retardance 94V-0
• VDE, TÜV also approved
TERMINAL LAYOUT
Distance of 9.16 mm .360 inch between common and coil termi-
nals and 8.9 mm .350 inch between contacts give room to the
land diameter width when the relay is mounted on PC board, and
allow design of patterns with insulation distances of 6 mm .236
inch between common and coil and 5.9 mm .232 inch between
contacts.
• 3 mm .118 inch or more insulation distance for close
mounting can be kept easily with JE-X relays.
In case of 3 mm
.118 inch land
diameter
5.9
.233
3 dia.
.118 dia.
3 dia.
.118 dia.
4.45
.175
9.16
.361
Coil
Coil
COM
N.O.
N.C.
4.45
.175
6.16
.243
1.3 dia.
.051 dia.
3 dia.
.118 dia.
8.9
.350
0.9
.035
N.O.N.C.
R1
8.9
.350
3
.118
N.O.N.C.
R2
SPECIFICATIONS
Contact
Coil
Remarks
* Specifications will vary with foreign standards certification ratings.
*
1
Measurement at same location as "Initial breakdown voltage" section
*
2
Detection current: 10 mA
*
3
Wave is standard shock voltage of
±
1.2
×
50
µ
s according to JEC-212-1981
*
4
Excluding contact bounce time
*
5
Half-wave pulse of sine wave: 6ms; detection time: 10
µ
s
*
6
Half-wave pulse of sine wave: 6ms
*
7
Detection time: 10
µ
s
*
8
Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT.
Characteristics
Arrangement 1 Form A 1 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
100 m
Ω
Contact material Silver alloy
Rating
(resistive
load)
Nominal switching
capacity
5 A 30 V DC, 5 A 125 V AC,
3A 250 V AC
Max. switching power 750 VA, 150 W
Max. switching voltage 250 V AC, 30 V DC
Max. switching current 5 A
Expected
life (min.
operations)
Mechanical (at 180 cpm) 5
×
10
6
Electrical (at 20 cpm)
(at rated load)
10
5
Minimum operating power 196 mW
Nominal operating power 400 mW
Max. operating speed 20 cpm (at 70
°
C)
Initial insulation resistance*
1
Min. 100 M
Ω
(at 500 V DC)
Initial
breakdown
voltage*
2
Between open contacts 750 Vrms
Between contacts and
coil
1,500 Vrms
Surge voltage between coil
and contact*
3
Min. 5,000 V
Operate time*
4
(at nominal voltage) Approx. 10 ms
Release time (without diode)*
4
(at nominal voltage)
Approx. 2 ms
Temperature rise (at 70
°
C)
Max. 45
°
C with nominal coil
voltage and at nominal
switching capacity
Shock resistance
Functional*
5
Min. 98 m/s
2
{10 G}
Destructive*
6
Min. 980 m/s
2
{100 G}
Vibration resistance
Functional*
7
98 m/s
2
{10 G}, 10 to 55 Hz
at double amplitude of 1.6 mm
Destructive
117.6 m/s
2
{12 G}, 10 to 55 Hz
at double amplitude of 2.0 mm
Conditions for operation,
transport and storage*
8
(Not freezing and condens-
ing at low temperature)
Ambient
temp.
–40
°
C to +70
°
C
–40
°
F to +158
°
F
Humidity 5 to 85% R.H.
Unit weight Approx. 9.2g .32 oz
mm inch mm inch
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
