ams Datasheet Page 9
[v1-00] 2015-Apr-01 Document Feedback
HLS-440P − Electrical Interface
Figure 10:
Definition of Error Category
Bit 3: EMC_Corr...EMC correction active
Value: 0 or 1
Bit 4: Negative drift info. If this bit is set, the prediction has gone
below the first of three warning levels.
Bit 5: Negative drift warning. If this bit is set, the prediction has
gone below the second warning level.
Bit 6: Negative drift alarm. If this bit is set, the prediction has
gone below the third warning level.
Bit 7 is not used.
Byte 4 Software Version Y.Z
Figure 11:
Byte 4 Software Version Numbering Code
This byte shows the firmware version.
View: Y.Z
Range: 0 - 255 (Hexadecimal 0 - FF)
Value: 0.0 - 15.15 (Hexadecimal 0.0 - F.F)
Code Name Description
0 No error Sensor OK
1 Performance error General function still given; Warm start-up indication (<5 s)
2 Slight functional error
General function still given but high likelihood for
upcoming severe error (sensor should be replaced)
3 Severe functional error
Severe error, general function NOT given anymore, sensor
not longer trustable (=signal not available)
Bit
MSB
7
6 5 4 3 2 1
LSB
0
Byte 4 YYYYXXXX