DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
EXPRESSED IN # OF POS
(-01 THRU -50)
ROW OPTION
-S: SINGLE (USE BODY HTSW-50-S-LCP)
-D: DOUBLE (USE BODY HTSW-50-D-LCP)
-T: TRIPLE (USE BODY HTSW-50-T-LCP)
-Q: DOUBLE ROW, .200 ROW SPACE
(USE BODY HTSW-50-T-LCP)
LEAD STYLE
(SEE TABLE 1)
PLATING SPECIFICATION
(SEE NOTE 2)
-G: 10µ" SELECTIVE GOLD IN CONTACT AREA, 3µ" SELECTIVE
GOLD ON TAIL.
-T: MATTE TIN ON CONTACT AND TAIL.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT AREA, 3µ" SELECTIVE
GOLD ON TAIL.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL.
-TL: 150µ" - 300µ" TIN/LEAD ON CONTACT AND TAIL.
-TM: MATTE TIN ON CONTACT AND TAIL.
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL.
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL.
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL.
OPTION
-LL: LOCKING LEAD (SEE FIG 2)
AVAIL ON .090[2.29] -
.310[7.87] TAILS ONLY
(N/A IN SINGLE ROW,
1 & 2 POS)
TAIL LENGTH
(.055[1.40] MIN)
SPACE OPTION
(.200[5.08] MIN)
MAX = "L" - .055[1.40]
OPTION
POLARIZATION
HW-XX-XX-XX-X-XXX-XXX-XX-XXX
(NO OF POSITIONS x .100[2.54])
"L" REF
OVERALL LENGTH
(SEE TABLE 1)
.000[0.00]
MIN
2.54
-XXX
±.008[0.20]
SPACE OPTION
(.200[5.08] MIN
(MAX = "L" - .055[1.40])
-XXX
±.008[0.20]
2.54
TAIL LENGTH
(.055[1.40] MIN)
.100
REF (TYP)
2.54
C
C
C
+.000[0.00]
-.015[0.38]
T-1S6-XX-X-2
HTSW-50-X-LCP
FIG 1
HW-10-09-XX-S-530-100 SHOWN
ROW OPTION
-S: SINGLE
.100
REF (TYP)
2.54
2
MAX SWAY
(EITHER DIRECTION)
ROW OPTION
-D: DOUBLE
ROW OPTION
-T: TRIPLE
ROW OPTION
-Q: DOUBLE ROW
'A'
ROW OPTION
-S: SINGLE
CRIMP SHORTER TAIL
ON OR ABOUT
(OPPOSITE CONTACT
AREA)
ROW OPTION
-D: DOUBLE
ROW OPTION
-T: TRIPLE
ROW OPTION
-Q: DOUBLE ROW
.04 1.0
.0080 0.204
.017 0.43
DETAIL 'A'
SCALE 3 : 1
C
50
01
01
99 100
02
150148
0301
150148
0301
C
FIG 2
-LL: LOCKING LEAD
(SAME AS FIG 1, DIFFERENT AS SHOWN)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
BY:
HW-XX-XX-XX-X-XXX-XXX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
REIDINGER
08/27/1991
1
1
SHEET SCALE: 3:2
INSULATOR: LCP, UL 94 VO, COLOR: NATURAL
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\HW-XX-XX-XX-X-XXX-XXX-XX-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. -F, -FM, -S, -SM, -L, -LM: GOLD TO BE ON LONGER TAIL;
-G, -H: THICKER GOLD TO BE ON LONGER TAIL.
3. MAXIMUM HEIGHT VARIATION: .010[0.25]
4. MAXIMUM ALLOWEABLE BOW: .005[0.13] IN/IN AFTER ASSEBMBLY.
5. MAXIMUM PIN ROTATION IN BODY: 2°
6. MINIMUM PUSHOUT FORCE: 2 LB.
7. PARTS ARE CUT TO SIZE.
8. MAXIMUM CUT FLASH: .005[0.13]
9. FOR ADDED MECHANICAL STABILITY, SAMTEC RECOMMENDS MECHANICAL
BOARD SPACERS BE USED IN APPLICATIONS WITH GOLD OR SELECTIVE
GOLD PLATED CONNECTORS. CONTACT IPG@SAMTEC.COM FOR MORE INFORMATION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.100[2.54] HIGH TEMP
TERMINAL BODY (BOARD STACKING)
REVISION Y
