Document number: DS30487 Rev. 14 - 2
© Diodes Incorporated
3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI5
Features
• Guard Ring Die Construction for Transient Protection
• Low Power Loss, High Efficiency
• Low Reverse Leakage Current
• Low Forward Voltage Drop
• High Forward Surge Current Capability
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
• An Automotive-Compliant Part is Available Under Separate
Mechanical Data
• Case: PowerDI
®
5
• Case Material: Molded Plastic, “Green” Molding Compound;
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin Annealed over Copper Leadframe;
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Weight: 0.093 grams (Approximate)
Ordering Information (Note 4)
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
S3100 = Product Type Marking Code
= Manufacturers’ Code Marking
Two Digits of Year (ex: 17 for 2017)
to 53)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
PowerDI is a registered trademark of Diodes Incorporated.