■Mounting the HLC Type Button
To mount the button, insert the
lower-rocker side first, and press
in the other side while pressing the
The button is not replaceable once
it is mounted.
HLS
HLS112
1 pole
HLS208
2 poles
Switching
function
Part No.
Viewed from part No. marking side
HLS112A■ OFF ON
Connecting
terminals
− 2−1
HLS112D■ ON ON
Connecting
terminals
2−32−1
HLS208K■ OFF ON
Connecting
terminals
−
2−1
5−4
HLS208N■ ON ON
Connecting
terminals
2−3
5−6
2−1
5−4
■
Dimension L
Terminal
style
Part No.
TAB:#187
Solder Terminal
HLS112A■ 29.5 26
HLS112D■ 29.5 26
■
Rating
Initial contact resistance
Dielectric strength Insulation resistance
Electrical life
HLS112A
HLS112D
AC125V 12A Max.
AC250V 6A Max.
20mΩ Max.
(DC2∼4V 1A)
AC1500V
1 minute
100MΩ Min.
(DC500V)
15,000
cycles
AC・DC6V 1mA Min.
■
Rating
Initial contact resistance
Dielectric strength Insulation resistance
Electrical life
HLS208K
HLS208N
AC125V 8A Max.
AC250V 5A Max.
20mΩ Max.
(DC2∼4V 1A)
AC1500V
1 minute
100MΩ Min.
(DC500V)
15,000
cycles
AC・DC6V 1mA Min.
Panel thickness
: 1∼3mm
To check the Part No. marked with the ■, refer to
List of Part Numbers on Page 325.
Solder Terminal
■Panel Cut-Out Dimension
■Placing an order
The button of the HLS type comes as an
accessory. Choose one from the table on page 328
and specify the color by part number when placing
an order.
Terminal numbers are shown on the bottom of the switch.
Terminal numbers are shown on the bottom of the switch.
The switching function Type A is without terminal number(3).
The switching function Type K is without terminal numbers (3) and (6).
TAB:#187 Terminal