OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

S216SE1

P1-P3P4-P6P7-P9P10-P12P13-P14
10
S216SE2 Series
✩
For additional design assistance, please review our corresponding Optoelectronic Application Notes.
● Standard Circuit
Tr1
R
1
D
1
V
1
+V
CC
AC Line
Load
Z
S
Z
S
: Surge absorption circuit (Snubber circuit)
SSR
3
4
1
2
S216SE2
Sheet No.: D4-A03501EN
● Degradation
In general, the emission of the IRED used in SSR will degrade over time.
In the case where long term operation and / or constant extreme temperature fluctuations will be applied to
the devices, please allow for a worst case scenario of 50% degradation over 5years.
Therefore in order to maintain proper operation, a design implementing these SSRs should provide at least
twice the minimum required triggering current from initial operation.
■ Manufacturing Guidelines
● Soldering Method
Flow Soldering (No solder bathing)
Flow soldering should be completed below 260˚C and within 10s.
Preheating is within the bounds of 100 to 150˚C and 30 to 80s.
Please solder within one time.
Other notices
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
11
S216SE2 Series
Sheet No.: D4-A03501EN
12
S216SE2 Series
Sheet No.: D4-A03501EN
Solvent cleaning :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
Ultrasonic cleaning :
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials :
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
● Cleaning instructions
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
● Presence of ODC
P1-P3P4-P6P7-P9P10-P12P13-P14

S216SE1

Mfr. #:
Buy S216SE1
Manufacturer:
Sharp Microelectronics
Description:
SSR RELAY SPST-NO 16A 80-240V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet