Datasheet for part number CA3106E36-15SB15F0
Our Catalog Part Number: CA3106E36-15S-B-15-F0
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet Connector with bayonet coupling
Shell Style Plug, straight
Endbell Style
Shielded connector with endbell for shielded braids
and heat shrinkable boots
Gender Socket
Shell Size 36
Contact Arrangement 36-15
Number of contacts 35 contacts size 16
Contact Type AWG Crimp
Contact Plating Hard silver
Contacts included no, delivery without contacts
Shielding yes
Contact Rating at +20 °C (68 °F)
(Size 15/15S/16/16S)
22 A
Contact Resistance
(Size 15/15S/16/16S)
6 mΩ
Wire Cross Section AWG 18/16
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 2000 Vrms
Air and Creepage Paths (Min) 1,1 mm
Ambient Temperature
Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions
IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for
16h)
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact
(Size 15/15S/16/16S)
1,0 N
Gauge
For infos on Gauge please see catalog
VG95234, part 1
Coupling Torque Closing: 23 Nm max / Opening: 1,03 Nm min
Contact Retention
(Size 15/15S/16/16S)
35 N
Shell Material Aluminium alloy
Shell Plating
Olive drab chromate over cadmium plating
(conductive)
Insulator and Grommet Material CR-Elastomere
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping
(Size 15/15S/16/16S)
6,2 mm
General Info
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 1 of
