OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

WBSBMVGXB-1

P1-P3P4-P6P7-P8
Supplemental Product Information
4
WLAN Module Operating Environment
PC with Linux Fedora13 with software development option and SDIO interface
Attention:
i.MX51evk, Linux kernel ver. 2.6.35
OMAP DM3730, Linux kernel ver. 2.6.37
What will be provided if the Evaluation Board is purchased
Data Report: Detail Module information
Application Note: Peripheral design guide
Evaluation Board Manual: Manual on how to evaluate the Module with the Evaluation Board
Labtool User Guide: RF Control Tool Guide
Labtool: RF Control Tool
WLAN Device Driver Software
for Linux PC, Fedora13
for i.MX51evk, Linux kernel ver. 2.6.35
for OMAP DM3730, Linux kernel ver. 2.6.37
Attention:
PC with SDIO is required. Although SDIO and SD Memory Card have the
same slot shape, they are not compatible. WLAN Module and Evaluation
Board will not work if they are connected to SD memory card slot.
There is a possibility that export control could limit customer’s access WLAN
Device Driver and the API Specification depending on the customer's country
or application.
Software Structure
5
module
Linux kernel platform
SDIO bus driver (BSP)
SDIO bus driver (BSP)
WLAN
WLAN
TCP/IP
TCP/IP
IO CTL
IO CTL
Ping
Iperf
Ping
Iperf
WLAN
WLAN
11bg config
11bg config
11a config
11a config
11n config
11n config
Supplicant
config
Supplicant
config
Infra/Adhoc
config
Infra/Adhoc
config
uAP/WFD
config
uAP/WFD
config
Data
Path
Data
Path
Device driver
Appli / Middle
SDIO I/F
Firmware
Data
Tx / Rx
Data
Tx / Rx
11b/g/a/n
Function
11b/g/a/n
Function
E-supplicant
Function
E-supplicant
Function
Infra/Adhoc
Function
Infra/Adhoc
Function
uAP/WFD
Function
uAP/WFD
Function
WLAN Device driver
- Data path
Communicate data such as TCP or UDP.
- 11bg config/11a config/11n config
Configure the such as Ch/Rate/band/mode.
- Supplicant config
Configure the generated key by supplicant of middleware.
- Infra/Adhoc config
Configure the Infa or Adhoc mode.
- uAP/WFD config
Configure the uAP or WFD mode.
Firmware
- Data Tx/Rx
Transmit and receive data on the air, such as TCP or UDP.
- 11b/g/a/n function
Execute the function of such as Ch/Rate/Band/Mode.
- E-supplicant function
Generate the key of WPA/WPA2.
- Infra/Adhoc function
Execute the function of Infra or Adhoc mode.
- uAP/WFD function
Execute the function of uAP or WFD mode.
*WFD : Wi-Fi Direct , E-supplicant : Embedded supplicant
iwconfig
iwpriv
iwconfig
iwpriv
uaputl
mlanconfig
uaputl
mlanconfig
Sample Application
- uaputl , mlanconfig (Configuration tools)
Software Feature Set
6
General
- 802.11/b Data rates of 1,2 ,5.5 and 11 Mbps.
- 802.11a/g Data rates 6 - 48, and 54 Mbps.
- 802.11n Data rates up to 72 and 150 Mbps.
- 802.11d International roaming.
- 802.11e Qos block ack.
- 802.11h Transmit power control, DFS.
- 802.11i WPA / WPA2 and 802.11X.
- Infrastructure and ad-hoc mode.
- Security WEP 64 and 128-bit, TKIP and AES-
CCMP for WPA / WPA2.
- WMM Support, WMM PS (UAPSD).
- IEEE Power Save, Auto Deep Sleep / Host Sleep.
- Embedded Supplicant.
- Support for Tx and Rx of AMPDU and AMSDU-4k
Packets.
- Support for Only Tx of AMSDU-8k Packets.
- Background Scan, Vendor specific IE
Access point
- Multi-BSS Support (2 BSS).
- Association support up to 10 Stations.
- ACS (Automatic Channel Selection).
Simultaneous AP-STA Operation
- AP-STA functionality.
- Independent security configurations on different
interfaces.
- Enhanced Power Save.
(AP-STA simultaneous power save)
Wi-Fi Direct/P2P
- Autonomous Group Owner (GO) Mode.
- P2P Client mode.
- P2P Client association with WLAN AP.
- P2P Client power save.
- P2P Client WMM PS (UAPSD).
- GO WMM PS / IEEE PS for associated P2P clients.
- 8 Client Support, Provision discovery.
P1-P3P4-P6P7-P8

WBSBMVGXB-1

Mfr. #:
Buy WBSBMVGXB-1
Manufacturer:
Taiyo Yuden
Description:
WiFi Development Tools (802.11) EvlBd for WYSBMVGX4 And WYSBMVGXB SDIO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet