3
Device Selection Guide
Part Number Color
Typical Viewing
angle, 2θ
½
(°)
[4]
Luminous Intensity I
v
(mcd) at 20
mA
[1,2,5]
Stando /
Non Stando
Package
drawingMin Max
HLMP-CB1A-XY0DD Blue 15° 7200 12000 Non Stando A
HLMP-CB1A-XYBDD
HLMP-CB1A-XYCDD
HLMP-CB1B-XY0DD Stando B
HLMP-CB1B-XYBDD
HLMP-CB1B-XYCDD
HLMP-CB2A-VW0DD 23° 4200 7200 Non Stando A
HLMP-CB2A-VWBDD
HLMP-CB2A-VWCDD
HLMP-CB2B-VW0DD Stando B
HLMP-CB2B-VWBDD
HLMP-CB2B-VWCDD
HLMP-CB3A-UV0DD 30° 3200 5500 Non Stando A
HLMP-CB3A-UVBDD
HLMP-CB3A-UVCDD
HLMP-CB3B-UV0DD Stando B
HLMP-CB3B-UVBDD
HLMP-CB3B-UVCDD
HLMP-CM1A-560DD Green 15° 45000 76000 Non Stando A
HLMP-CM1B-560DD Stando B
HLMP-CM2A-230DD 23° 21000 35000 Non Stando A
HLMP-CM2B-230DD Stando B
HLMP-CM3A-Z10DD 30° 12000 21000 Non Stando A
HLMP-CM3A-Z1BDD
HLMP-CM3A-Z1CDD
HLMP-CM3B-Z10DD Stando B
HLMP-CM3B-Z1BDD
HLMP-CM3B-Z1CDD
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition.
2. The optical axis is closely aligned with the package mechanical axis.
3. Dominant wavelength, λ
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ
½
is the o-axis angle where the luminous intensity is half the on-axis intensity.
5. Tolerance for each bin limit is ± 15%