The Smart Timing Choice
The Smart Timing Choice
SiT1604
Oscillator for Security and Surveillance Applications
Rev. 1.02 Page 6 of 7 www.sitime.com
Ordering Information
Note:
11. Contact SiTime for custom drive strength to drive higher or multiple load, or SoftEdge™ option for EMI reduction.
Supported Frequencies
[12]
Note:
12. Contact SiTime for frequencies that are not listed in the above table.
Note:
13. For “–”, contact SiTime for availability.
3.57 MHz 4.096 MHz 8.192 MHz 10 MHz 11.0592 MHz 11.2896 MHz 12 MHz 12.288 MHz 14.318 MHz
14.31818 MHz 20 MHz 22.5792 MHz 24 MHz 24.576 MHz 25 MHz 26 MHz 27 MHz 28.375 MHz
28.6363 MHz 28.63636 MHz 30 MHz 33 MHz 36 MHz 37.125 MHz 38.4 MHz 48 MHz 50 MHz
54 MHz 58 MHz 60 MHz 65 MHz 66 MHz 72 MHz 74.250 MHz 75 MHz 80 MHz
Ordering Codes for Supported Tape & Reel Packing Method
[13]
Device Size 8 mm T&R (3ku) 8 mm T&R (1ku) 12 mm T&R (3ku) 12 mm T&R (1ku) 16 mm T&R (3ku) 16 mm T&R (1ku)
2.0 x 1.6 mmDE––––
2.5 x 2.0 mmDE––––
3.2 x 2.5 mmDE––––
5.0 x 3.2 mm – – T Y – –
7.0 x 5.0 mm––––TY
Frequency
Refer to frequency list below
Part Family
“SiT1602”
Revision Letter
“A” is the revision
Temperature Range
“I” Industrial, -40 to 85ºC
Supply Voltage
“18” for 1.8V ±10%
“25” for 2.5V ±10%
“28” for 2.8V ±10%
“33” for 3.3V ±10%
Packaging
Blank for Bulk
Output Driver Strength
“–” Default
Feature Pin
“E” for Output Enable
“S” for Standby
“C” Commercial, -20 to 70ºC
Frequency Stability
“1” for ±20 PPM
“2” for ±25 PPM
Package Size
“1” 2.5 x 2.0 mm
“2” 3.2 x 2.5 mm
“3” 5.0 x 3.2 mm
“T”: 12/16 mm Tape & Reel, 3ku reel
“Y”: 12/16 mm Tape & Reel, 1ku reel
“8” 7.0 x 5.0 mm
SiT1604AC - 12-18E -25.000000T
“7” 2.0 x 1.6 mm
[11]
“30” for 3.0V ±10%
“D”: 8 mm Tape & Reel, 3ku reel
“E”: 8 mm Tape & Reel, 1ku reel
“XX” for 2.25V to 3.63V
