MAX13053ESA+ Datasheet MAX13052ASA+T, MAX13052ESA+, MAX13054ASA+ | P1-P3

19-3598; Rev 1; 2/13

MAX13050/MAX13052/

MAX13053/MAX13054

Industry-Standard High-Speed CAN

Transceivers with ±80V Fault Protection

For pricing, delivery, and ordering information, please contact Maxim Direct

at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.

General Description

The MAX13050/MAX13052/MAX13053/MAX13054 are pin-

for-pin compatible, industry-standard, high-speed, control

area network (CAN) transceivers with extended ±80V fault

protection. These products are ideal industrial network

applications where overvoltage protection is required.

These CAN transceivers provide a link between the CAN

protocol controller and the physical wires of the bus lines in

a CAN. These devices can be used for DeviceNet

applications, requiring data rates up to 1Mbps.

The CAN transceivers have an input common-mode

range greater than ±12V, exceeding the ISO11898

specification of -2V to +7V, and feature ±8kV ESD pro-

tection, making these devices ideal for harsh industrial

environments.

The CAN transceivers provide a dominant timeout func-

tion that prevents erroneous CAN controllers from clamp-

ing the bus to a dominant level if the TXD input is held low

for greater than 1ms. The MAX13050/MAX13052 provide

a SPLIT pin used to stabilize the recessive common-

mode voltage. The MAX13052 also has a slope-control

mode that can be used to program the slew rate of the

transmitter for data rates of up to 500kbps. The

MAX13053 features a silent mode that disables the trans-

mitter. The MAX13053 also has a reference output that

can be used to bias the input of older CAN controllers

that have a differential comparator. The MAX13054 has a

separate dedicated logic input, V

CC2

, allowing interfacing

with a +3.3V microcontroller.

The MAX13050/MAX13052/MAX13053/MAX13054 are

available in an 8-pin SO package and are specified to

operate in the -40°C to +85°C and the -40°C to +125°C

temperature ranges.

Features

o Fully Compatible with the ISO11898 Standard

o ±8kV ESD IEC 61000-4-2 Contact Discharge per

IBEE Test Facility

o ±80V Fault Protection

o +3.3V Logic Compatible (MAX13054)

o High-Speed Operation of Up to 1Mbps

o Slope-Control Mode (MAX13052)

o Greater than ±12V Common-Mode Range

o Low-Current Standby Mode

o Silent Mode (MAX13053)

o Thermal Shutdown

o Short-Circuit Protection

o Transmit (TXD) Data Dominant Timeout

o Current Limiting

o SPLIT Pin (MAX13050/MAX13052)

Ordering Information

PART TEMP RANGE PIN-PACKAGE

MAX13050ESA+ -40°C to +85°C 8 SO

MAX13050ASA+ -40°C to +125°C 8 SO

MAX13052ESA+ -40°C to +85°C 8 SO

MAX13052ASA+ -40°C to +125°C 8 SO

MAX13053ESA+ -40°C to +85°C 8 SO

MAX13053ASA+ -40°C to +125°C 8 SO

MAX13054ESA+ -40°C to +85°C 8 SO

MAX13054ASA+ -40°C to +125°C 8 SO

Selector Guide

PART SPLIT

SLOPE

CONTROL

STANDBY

MODE

SILENT

MODE

3.3V

SUPPLY

REF

PIN-FOR-PIN

REPLACEMENT

MAX13050 Yes — Yes — — — TJA1040

MAX13052 Yes Yes Yes — — — PCA82C250/51

MAX13053 — — — Yes — Yes

TJA1050,

AMIS-30660

MAX13054 — — Yes Yes —

TLE6250v33,

CF163

Pin Configurations, Functional Diagrams, and Typical

Operating Circuits appear at end of data sheet.

DeviceNet Nodes

Medium- and Heavy-Duty

Truck Systems

Industrial

Applications

DeviceNet is a registered trademark of the Open DeviceNet

Vendor Association.

Denotes a lead(Pb)-free/RoHS-compliant package.

MAX13050/MAX13052/MAX13053/MAX13054

Industry-Standard High-Speed CAN

Transceivers with ±80V Fault Protection

Maxim Integrated

ABSOLUTE MAXIMUM RATINGS

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

, V

2 ...............................................................-0.3V to +6V

RS ...............................................................-0.3V to (V

+ 0.3V)

TXD, STBY, S, REF, RXD .........................................-0.3V to +6V

CANH, CANL, SPLIT ..........................................................± 80V

Continuous Power Dissipation (T

= +70°C)

8-Pin SO (derate 5.9mW/°C above +70°C) .................470mW

Operating Temperature Range .........................-40°C to +125°C

Junction Temperature......................................................+150°C

Storage Temperature Range .................................-65°C +150°C

Lead Temperature (soldering, 10s) ................................+300°C

Soldering Temperature (reflow) ......................................+260°C

DC ELECTRICAL CHARACTERISTICS

= +5V ±5%, V

2 = +3V to +3.6V, T

= T

MIN

to T

MAX

, unless otherwise noted. Typical values are at V

= +5V, V

2 = +3.3V,

= 60Ω, and T

= +25°C.) (Note 1)

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Dominant, R

= 60Ω 72

MAX13050/MAX13052/

MAX13053

12.5

Supply Current I

Recessive

MAX13054 10

2 Supply Current I

CC2

MAX13054, TXD = V

2 or unconnected 15 µA

MAX13052 25

Standby Current I

STANDBY

MAX13050/MAX13054 11

µA

Silent Mode I

SILENT

MAX13053 12.5 mA

Thermal-Shutdown Threshold T

+165 °C

Thermal-Shutdown Hysteresis 13 °C

INPUT LEVELS (TXD, STBY, S)

High-Level Input Voltage V

TXD, STBY (MAX13054)

0.7 x

0.8

Low-Level Input Voltage V

TXD, STBY (MAX13054)

0.3 x

TXD

= V

, V

TXD

= V

2 (MAX13054) -5 +5

High-Level Input Current I

STBY

= V

, V

= V

(MAX13053) -5 +5

µA

TXD

= GND -300 -100

Low-Level Input Current I

STBY

= GND, V

= GND (MAX13053) -10 -1

µA

Input Capacitance C

10 pF

CANH, CANL TRANSMITTER

Normal mode, V

TXD

= V

, no load 2 3 V

Recessive Bus Voltage

CANH

CANL Standby mode, no load -100 +100 mV

CANH

, V

CANL

= ±76V ±3

Recessive Output Current

CANH

CANL

-32V ≤ V

CANH

, V

CANL

≤ +32V -2.5 +2.5

CANH Output Voltage V

CANH

TXD

= 0, dominant 3.0 4.25 V

CANL Output Voltage V

CANL

TXD

= 0, dominant 0.50 1.75 V

Matching Between CANH and

CANL Output Voltage

∆DOM

TXD

= 0, dominant, T

= +25°C,

CANH

+ V

CANL

) - V

-100 +150 mV

MAX13050/MAX13052/MAX13053/MAX13054

Industry-Standard High-Speed CAN

Transceivers with ±80V Fault Protection

Maxim Integrated

DC ELECTRICAL CHARACTERISTICS (continued)

= +5V ±5%, V

2 = +3V to +3.6V, T

= T

MIN

to T

MAX

, unless otherwise noted. Typical values are at V

= +5V, V

2 = +3.3V,

= 60Ω, and T

= +25°C.) (Note 1)

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Dominant, V

TXD

= 0, 45Ω ≤ R

≤ 60Ω 1.5 3.0 V

Differential Output

CANH

- V

CANL

)

DIFF

Recessive, V

TXD

= V

, no

load -50 +50 mV

CANH Short-Circuit Current I

CANHSC

CANH

= 0, V

TXD

= 0 -100 -70 -45 mA

CANL

= 5V, V

TXD

= 0 406090

CANL

= 40V, V

TXD

= 0 (Note 2) 40 60 90CANL Short-Circuit Current I

CANLSC

CANL

= 76V, V

TXD

= 0 63

RXD OUTPUT LEVELS

I = -100µA

0.8 x

RXD High-Output-Voltage Level V

I = -100µA (MAX13054)

0.8 x

RXD Low-Output-Voltage Level V

I = 5mA 0.4 V

COMMON-MODE STABILIZATION (SPLIT) and REF

Output Voltage V

SPLIT

Normal mode,

-500µA ≤ I

SPLIT

≤ 500µA

0.3 x

0.7 x

Standby mode, -40V ≤ V

SPLIT

≤ +40V 20

Leakage Current I

LEAK

Standby mode, -76V ≤ V

SPLIT

≤ +76V 50

µA

REF Output Voltage V

REF

-50µA ≤ I

REF

≤ +50µA (MAX13053)

0.45 x

0.55 x

DC BUS RECEIVER (V

TXD

= V

, CANH and CANL externally driven)

-12V ≤ V

≤ +12V 0.5 0.7 0.9

Differential Input Voltage V

DIFF

MAX13050/MAX13052/MAX13054

-12V ≤ V

≤ +12V (standby mode)

0.50 1.15

Differential Input Hysteresis V

D IF F

(

H Y S T

)

Normal mode, -12V ≤ V

≤ +12V 70 mV

Common-Mode Input Resistance R

ICM

Normal or standby mode,

CANH

= V

CANL

= ±12V

15 35 kΩ

Matching Between CANH and

CANL Common-Mode Input

Resistance

IC_MATCH

CANH

= V

CANL

-3 +3 %

Differential Input Resistance R

DIFF

Normal or standby mode,

CANH

- V

CANL

= 1V

25 75 kΩ

Common-Mode Input

Capacitance

TXD

= V

20 pF

Differential Input Capacitance V

TXD

= V

10 pF

Input Leakage Current I

= 0, V

CANH

= V

CANL

= 5V -5 +5 µA

SLOPE CONTROL RS (MAX13052)

Input Voltage for High Speed V

IL_RS

0.3 x

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P20

MAX13053ESA+

Mfr. #:

Buy MAX13053ESA+

Manufacturer:

Maxim Integrated

Description:

CAN Interface IC CAN Transceiver w/80V Fault Protect

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MAX13053ESA+

MAX13053ESA+

Products related to this Datasheet