OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

RSMF2JT470R

P1-P3P4-P5
Rev Date: 01/12/2017
1 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RSF/RSMF Series
General Purpose Metal Oxide Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Maximum Maximum Resistance
Type / Code Working Overload Temperature
Voltage (1) Voltage Coefficient
RSF12 0.5W 250V 400V 350V ±200 ppm/ºC 0.1 - 150K 0.1 - 75K
RSF1 1W 350V 600V 600V ±200 ppm/ºC
RSF2 2W 350V 600V 600V ±200 ppm/ºC
RSF3 3W 800V 1,000V 750V ±200 ppm/ºC
RSF5 5W 1,000V 1,000V 750V ±200 ppm/ºC
RSMF12 0.5W 250V 400V 350V ±200 ppm/ºC 0.1 - 46.4K 0.1 - 47K
RSMF1 1W 350V 600V 500V ±200 ppm/ºC
RSMF2 2W 350V 600V 500V ±200 ppm/ºC
RSMF3 3W 500V 800V 600V ±200 ppm/ºC 0.1 - 118K 0.1 - 120K
RSMF5 5W 1,000V 1,000V 750V ±200 ppm/ºC 0.1 - 470K 0.1 - 560K 0.1 - 1M
(1) Lesser of √PR or maximum working voltage
0.1 - 470K
0.1 - 470K
0.1 - 470K
0.1 - 560K
0.1 - 560K
0.1 - 100K
0.1 - 120K
0.1 - 75K
0.1 - 100K
0.1 - 1M
0.1 - 1M
0.1 - 1M
0.1 - 1M
0.1 - 1M
0.1 - 470K
0.1 - 470K
0.1 - 470K
Power Rating
(Watts)
@ 70ºC
Dielectric
Withstanding
Voltage
1%
2%
Ohmic Range (Ω) and Tolerance
5%
180
200
220
Percent Rated Power (%)
100
-55ºC
70ºC
80
60
40
20
240
235
Ambient Temperature (ºC)
-60
0
20
40
60
80
100
120
140
160
RSMF2, RSMF3, RSMF5
RSF12
RSMF12, RSMF1
Features:
Power Derating Curve:
• Lower-cost alternative to carbon comps and wirewounds
• Coating meets UL 94V-0
• Meets solvent test of Mil Standard 202, Method 215
• Cut and formed product is available on select sizes;
contact factory for details
• Higher or lower resistance values may be possible;
contact factory
• Flameproof
• RoHS compliant / lead-free
Electrical Specifications
Rev Date: 01/12/2017
2 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RSF/RSMF Series
General Purpose Metal Oxide Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
0.35 ± 0.04 0.13 ± 0.03 1.10 ± 0.12 0.03 ± 0.003 0.250 inches
9.00 ± 1.00 3.20 ± 0.80 28.00 ± 3.00 0.70 ± 0.08 6.35 mm
0.43 ± 0.06 0.18 ± 0.04 1.10 ± 0.20 0.03 ± 0.002 0.250 inches
11.00 ± 1.50 4.50 ± 1.00 28.00 ± 5.00 0.80 ± 0.05 6.35 mm
0.59 ± 0.06 0.22 ± 0.04 1.18 ± 0.20 0.03 ± 0.004 0.250 inches
15.00 ± 1.50 5.50 ± 1.00 30.00 ± 5.00 0.75 ± 0.10 6.35 mm
0.69 ± 0.04 0.24 ± 0.02 1.38 ± 0.12 0.03 ± 0.002 0.250 inches
17.50 ± 1.00 6.00 ± 0.50 35.00 ± 3.00 0.80 ± 0.05 6.35 mm
0.96 ± 0.04 0.31 ± 0.02 1.38 ± 0.12 0.03 ± 0.002 0.250 inches
24.50 ± 1.00 8.00 ± 0.50 35.00 ± 3.00 0.80 ± 0.05 6.35 mm
0.24 ± 0.03 0.09 ± 0.01 1.10 ± 0.12 0.02 ± 0.003 0.250 inches
6.00 ± 0.80 2.30 ± 0.30 28.00 ± 3.00 0.55 ± 0.07 6.35 mm
0.35 ± 0.04 0.13 ± 0.03 1.10 ± 0.12 0.03 ± 0.003 0.250 inches
9.00 ± 1.00 3.20 ± 0.80 28.00 ± 3.00 0.70 ± 0.08 6.35 mm
0.43 ± 0.06 0.18 ± 0.04 1.18 ± 0.20 0.03 ± 0.002 0.250 inches
11.00 ± 1.50 4.50 ± 1.00 30.00 ± 5.00 0.80 ± 0.05 6.35 mm
0.59 ± 0.06 0.22 ± 0.04 1.18 ± 0.20 0.03 ± 0.004 0.250 inches
15.00 ± 1.50 5.50 ± 1.00 30.00 ± 5.00 0.75 ± 0.10 6.35 mm
0.69 ± 0.04 0.24 ± 0.02 1.38 ± 0.08 0.03 ± 0.002 0.250 inches
17.50 ± 1.00 6.00 ± 0.50 35.00 ± 2.00 0.80 ± 0.05 6.35 mm
RSF12
RSF1
RSF2
RSF3
RSMF3
RSMF5
RSF5
RSMF12
RSMF1
RSMF2
Type / Code
A
B
C
D
Unit
Body Length
Body Diameter
Lead Length (Bulk)
Lead Diameter
Lead-Tape
Specification
Performance Characteristics
Mechanical Specifications
Test Test Method Typical Results
Insulation Resistance
JIS C5201-1, IEC60115-1, 4.6 ≥ 1GΩ
Voltage Proof
JIS C5201-1, IEC60115-1, 4.7 ≤ ± (0.5% + 0.05Ω) No mechanical damage. <± 0.25%
Short Time Overload JIS C5201-1, IEC60115-1, 4.13 <± 0.1%
Resistance to Solder Heat JIS C5201-1, IEC60115-1, 4.18 <± 1.0%
Endurance at 70°C JIS C5201-1, IEC60115-1, 4.25.1 <± 2.0%
Robustness of Terminations JIS C5201-1, IEC60115-1, 4.16 <± 0.10%
Damp Heat (Steady state) JIS C5201-1, IEC60115-1, 4.24 <± 1.5%
Rapid Change of Temperature JIS C5201-1, IEC60115-1, 4.19 <± 0.2%
Resistance to Solvents JIS C5201-1, IEC60115-1, 4.29 Pass
Intermittent Overload JIS C5201-1, IEC60115-1, 4.39 <± 0.3%
Accidental Overload (Flame resistance) JIS C5201-1, IEC60115-1, 4.26 Pass
Operating Temperature Range:
Test Specification
≥ 1GΩ
≤ ± (0.75% + 0.05Ω)
≤ ± (2.0% + 0.05Ω)
≤± (5.0% + 0.05Ω)
-55ºC to +200ºC (RSF12, RSMF12, RSMF1)
-55ºC to +235ºC (All others)
≤ ± (1.0% + 0.05Ω)
≤± (5% + 0.05Ω)
≤± (1% + 0.05Ω)
No damage to component or removal of marking.
≤± (2% + 0.05Ω)
No flaming of gauze.
Rev Date: 01/12/2017
3 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RSF/RSMF Series
General Purpose Metal Oxide Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Reeled in accordance with EIA-296-F
z
Packaging Specifications
Series Code
A max
.(1)
B max
Tape Unit
2.736 13.504
0.197 ± 0.020 2.063
±
0.079 0.250 inches
69.50
343.00 5.00 ± 0.50 52.40 ± 2.00 6.35 mm
2.815 13.504
0.197 ± 0.020
2.063
± 0.079 0.250 inches
71.50
343.00 5.00 ± 0.50
52.40 ± 2.00 6.35 mm
3.524 13.504
0.394 ± 0.020 2.500
±
0.079 0.250 inches
89.50
343.00 10.00 ± 0.50
63.50 ± 2.00 6.35 mm
3.740 12.008
0.394 ± 0.020 2.874
±
0.079 0.250
inches
95.00
305.00 10.00 ± 0.50 73.00 ±
2.00 6.35 mm
4.331 12.008
0.394 ± 0.020 3.465 ± 0.079 0.250 inches
110.00
305.00 10.00 ± 0.50 88.00
± 2.00 6.35 mm
2.618 13.504
0.197 ± 0.020 2.063 ± 0.079 0.250 inches
66.50
343.00 5.00 ± 0.50
52.40 ± 2.00 6.35 mm
2.736 13.504
0.197 ± 0.020 2.063 ± 0.079 0.250 inches
69.50
343.00 5.00 ± 0.50 52.40 ± 2.00 6.35 mm
2.815 13.504
0.197 ± 0.020 2.063 ± 0.079 0.250 inches
71.50
343.00 5.00 ± 0.50 52.40 ± 2.00 6.35 mm
3.524 13.504
0.394 ± 0.020 2.500
± 0.079 0.250 inches
89.50
343.00 10.00 ± 0.50 63.50 ± 2.00 6.35 mm
3.740
12.008
0.394 ± 0.020 2.874
± 0.079 0.250 inches
95.00
305.00 10.00 ± 0.50 73.00 ± 2.00 6.35 mm
RSMF
12
1
2
3
5
C
D
(2)
RSF
12
1
2
3
5
(1)
(2)
Dimension "E":
This is a non-critical dimension that does not have a tolerance in the standard.
Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm).
Reference value only. The "A" dimension shall be governed by the overall length of the taped component.
The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component.
The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code.
P1-P3P4-P5

RSMF2JT470R

Mfr. #:
Buy RSMF2JT470R
Manufacturer:
Description:
Res Metal Oxide 470 Ohm 5% 2W ±200ppm/C Conformal Coated AXL T/R
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet