VJ....W1BC Ultra Small Series 0201
www.vishay.com
Vishay
Revision: 05-Jul-16
1
Document Number: 28538
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Multilayer Ceramic Chip Capacitors
for Ultra Small Commodity Applications
FEATURES
• High capacitance in unit size
• High precision dimensional tolerances
• Suitably used in high-accuracy automatic
mounting machine
• Dry sheet manufacturing technology
• Base Metal Electrode system (BME)
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• Miniature microwave module
• Portable equipment - mobile phone, PDA
Notes
(1)
Measured at 30 % to 70 % relative humidity
NP0: apply 1.0 V
RMS
± 0.2 V
RMS
, 1.0 MHz ± 10 % at the condition of 25 °C ambient temperature
X7R, X5R: apply 1.0 V
RMS
± 0.2 V
RMS
, 1.0 kHz ± 10 % (0201 / 6.3 V, cap. 224: 0.5 V
RMS
± 0.2 V
RMS
, 1.0 kHz ± 10 %) at the condition of
25 °C ambient temperature
(2)
Preconditioning for X7R / X5R MLCC: perform a heat treatment at 150 °C ± 10 °C for 1 h, then leave in ambient condition for 24 h ± 2 h
before measurement
(3)
Tolerances restriction see “Selection Chart”
Table 1
X7R / X5R:
ELECTRICAL SPECIFICATIONS
Size 0201
Dielectric C0G (NP0) X7R X5R
Capacitance 0.5 pF to 120 pF 100 pF to 10 nF 100 pF to 2.2 µF
Capacitance Tolerance
(2)(3)
Cap. 5 pF: B (± 0.1 pF), C (± 0.25 pF)
5 pF < Cap. < 10 pF: C (± 0.25 pF), D (± 0.5 pF)
Cap. 10 pF: F (± 1 %), G (2 %), J (5 %),
K (± 10 %)
J (± 5 %)
K (± 10 %)
M (± 20 %)
J (± 5 %)
K (± 10 %)
M (± 20 %)
Rated Voltage (V
DC
) 16 V, 25 V, 50 V 10 V, 16 V, 25 V, 50 V 6.3 V, 10 V, 16 V, 25 V, 50 V
tan /Q
(1)
Cap. < 30 pF, Q 400 + 20 C
Cap.
30 pF, Q 1000
See Table 1
Insulation Resistance at U
R
10 G 10 G or R x C 500 F, whichever is less
Operating Temperature -55 °C to +125 °C -55 °C to +85 °C
Capacitance Change ± 30 ppm ± 15 %
Termination Ni/Sn lead (Pb)-free termination
RATED VOLTAGE D.F. EXCEPTION OF D.F.
50 V 3 % - -
25 V 3.5 % 5 % 0201 0.01 F
16 V 3.5 %
5 % 0201 0.01 F
10 % 0201 0.1 F
10 V 5 %
10 % 0201 0.012 F
15 % 0201 0.1 F
6.3 V 10 % 15 % 0201 0.1 F
