OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APDS-9306-065

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
APDS-9306/APDS-9306-065
Miniature Surface-Mount Digital Ambient Light Sensor
Data Sheet
Features
Ambient Light Sensing
- Utilizes Coating Technology to Emulate Human Eye
Spectral Response
- High Sensitivity in Low Lux Condition – Ideally
Suited for Operation Behind Dark Glass
- Wide Dynamic Range 18,000,000 : 1
- Low Lux Performance 0.01 lux
- Up to 20-Bit Resolution
Wide Power Supply Range 1.7V to 3.6V
- 50Hz/60Hz light  icker immunity
- Fluorescent light  icker immunity
Power Management
- Low Active Current: 85 A typical
I
2
C-bus Interface Compatible
- Up to 400 kHz (I
2
C Fast-Mode)
- Dedicated Interrupt Pin
Small Package:
- APDS-9306: L2.0 x W2.0 x H0.34mm
- APDS-9306-065: L2.0 x W2.0 x H0.65mm
Ordering Information
Part Number Packaging Quantity
APDS-9306 Tape & Reel 2500 per reel
APDS-9306-065 Tape & Reel 2500 per reel
Description
Avago Technologies' APDS-9306/APDS-9306-065 is a low-
voltage Digital Ambient Light Sensor that converts light
intensity to digital signal output with I
2
C interface. It consists
of photodiode, ADC, oscillator and power-on reset to ensure
consistent start-up. ADCs convert the photodiode currents
to a digital output and the device is capable of rejecting
50Hz and 60Hz  icker caused by arti cial light sources.
The APDS-9306/APDS-9306-065 approximates the
response of the human-eye providing direct read out,
where the output count is proportional to ambient light
level. Low light functionality enables operation behind
darkened glass. The APDS-9306/APDS-9306-065 supports
programmable hardware interrupt with hysteresis to
respond to events.
APDS-9306 ultra slim form factor with a height of only
0.34mm and APDS-9306-065 with a height of 0.65mm
enables the sensor to be designed into space-sensitive
applications.
Applications
Detection of ambient light to control display
backlighting
o Wearable devices – Smart watch, Sport Watch
o Mobile devices – Cell phones, PDAs, PMP
o Computing devices – Notebooks, Tablet PC, Key
board
o Consumer devices – LCD Monitor, Flat-panel TVs,
Video Cameras, Digital Still Camera
Automatic Residential and Commercial Lighting
Management
2
I/O Pins Con guration
APDS-9306 I/O Pins Con guration
Pin Name Type Description
1 GND Ground Power supply ground. All voltages are referenced to GND
2 NC No Connect
3 NC No Connect
4V
DD
Supply Power supply voltage
5 SCL I I
2
C serial clock input terminal – clock signal for I
2
C serial data
6 SDA I/O I
2
C serial data I/O terminal – serial data I/O for I
2
C
7 INT O Interrupt – open drain
8 NC No Connect
APDS-9306-065 I/O Pins Con guration
Pin Name Type Description
1 SCL I I2C serial clock input terminal - clock signal for I
2
C serial data
2 SDA I/O Serial Data I/O for I
2
C
3 VDD Supply Power Supply Voltage
4 INT O Interrupt - Open Drain
5 NC No Connect
6 GND Ground Power supply ground. All voltages are referenced to GND
Temperature
ADC/Data
Clear ADC/Data
ALS ADC/Data
Upper Threshold
Lower Threshold
Interrupt
I
2
C Interfacing
INT
SCL
SDA
VDD
GND
Regulator
Oscillator
Functional Block Diagram
3
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)+
Parameter Symbol Min Max Units Conditions
Power Supply Voltage
[1]
V
DD
3.8 V
Max Voltage on SCL, SDA, INT
pads
V
O
-0.5 3.8 V
Storage Temperature Range T
stg
−45 85 °C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may a ect device reliability.
Note 1. All voltages are with respect to GND.
Recommended Operating Conditions
Parameter Symbol Min Typ Max Units
Operating Ambient Temperature T
A
-40 85 °C
Supply Voltage V
DD
1.7 3.6 V
Supply Voltage Accuracy, V
DD
total error including transients
-3 3 %
Operating Characteristics V
DD
= 2.8 V, T
A
= 25°C (unless otherwise noted)
Parameter Symbol Min. Typ. Max. Units Test Conditions
Supply Current I
DD
85 µA G=18x, 50ms
I
STBY
2 µA In Standby Mode. No
active I
2
C communication
SCL, SDA Input High Voltage V
IH
1.5 VDD V
SCL, SDA Input Low Voltage V
IL
0 0.4 V
VOL , INT, Output Low Voltage V
OL
0 0.4 V
Leakage Current, SDA, SCL, INT Pins I
LEAK
-5 5 µA
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

APDS-9306-065

Mfr. #:
Buy APDS-9306-065
Manufacturer:
Broadcom / Avago
Description:
Ambient Light Sensors Digital Ambient Light Sensor
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet