6.42
IDT70V3319/99S
High-Speed 3.3V 256/128K x 18 Dual-Port Synchronous Static RAM Industrial and Commercial Temperature Ranges
14
CLK
"A"
R/W
"A"
ADDRESS
"A"
DATA
IN"A"
CLK
"B"
R/W
"B"
ADDRESS
"B"
DATA
OUT"B"
t
SW
t
HW
t
SA
t
HA
t
SD
t
HD
t
SW
t
HW
t
SA
t
HA
t
CO
(3)
t
CD2
NO
MATCH
VALID
NO
MATCH
MATCH
MATCH
VALID
5623 drw 10
t
DC
Timing Waveform of Left Port Write to Pipelined Right Port Read
(1,2,4)
NOTES:
1. CE
0, UB, LB, and ADS = VIL; CE1, CNTEN, and REPEAT = VIH.
2. OE = V
IL for Port "B", which is being read from. OE = VIH for Port "A", which is being written to.
3. If t
CO < minimum specified, then data from Port "B" read is not valid until following Port "B" clock cycle (ie, time from write to valid read on opposite port will be
t
CO + 2 tCYC2 + tCD2). If tCO > minimum, then data from Port "B" read is available on first Port "B" clock cycle (ie, time from write to valid read on opposite port
will be t
CO + tCYC2 + tCD2).
4. All timing is the same for Left and Right ports. Port "A" may be either Left or Right port. Port "B" is the opposite of Port "A"
Timing Waveform with Port-to-Port Flow-Through Read
(1,2,4)
DATA
IN "A"
CLK
"B"
R/W
"B"
ADDRESS
"A"
R/W
"A"
CLK
"A"
ADDRESS
"B"
NO
MATCH
MATCH
NO
MATCH
MATCH
VALID
t
CD1
t
DC
DATA
OUT "B"
5623 drw 11
VALID
VALID
t
SW
t
HW
t
SA
t
HA
t
SD
t
HD
t
HW
t
CD1
t
CO
t
DC
t
SA
t
SW
t
HA
(3)
NOTES:
1. CE
0, UB, LB, and ADS = VIL; CE1, CNTEN, and REPEAT = VIH.
2. OE = V
IL for the Right Port, which is being read from. OE = VIH for the Left Port, which is being written to.
3. If t
CO < minimum specified, then data from Port "B" read is not valid until following Port "B" clock cycle (i.e., time from write to valid read on opposite port will be
t
CO + tCYC + tCD1). If tCO > minimum, then data from Port "B" read is available on first Port "B" clock cycle (i.e., time from write to valid read on opposite port will
be t
CO + tCD1).
4. All timing is the same for both left and right ports. Port "A" may be either left or right port. Port "B" is the opposite of Port "A".